XTS Frame Lower Parts Kit Fits GLOCK Gen 3 17 19 23 22 32 31 GL LPK UPC 767820110967
Product Description
The XTS (Xtreme Tactical Sports) Complete Frame Lower Parts Kit for Glock Gen 3 (MPN: GL-LPK) is a comprehensive internal completion assembly engineered to populate OEM Glock Generation 3 standard receiver frames and aftermarket 80% or custom compact and full-size lower housings. Manufactured to original equipment factory specifications, this all-in-one LPK provides every internal spring, pin, lever, and housing necessary to turn a stripped frame module into a fully functioning lower receiver.
Precision-milled and stamped from high-strength hardened steel and impact-resistant polymer composites, the GL-LPK features a smooth-face trigger shoe on a nickel-plated trigger bar, a standard 5.5 lb target/duty connector, a trigger housing fitted with a factory-style ejector, and a complete pin set. The kit incorporates all internal security and cycling components, including the slide lock with coil spring, factory-style slide stop lever assembly, and magazine catch with retention spring.
Whether building an aftermarket Polymer80, SCT Manufacturing, or Lone Wolf custom frame, or completely overhauling a worn factory Glock 17, 19, 22, 23, 31, or 32 lower receiver, the XTS GL-LPK guarantees reliable lockup, smooth trigger resets, and consistent primer strikes. Backed by XTS quality assurance, it serves as an indispensable kit for custom bench builds and emergency armorer maintenance.
Armorer Bench Notes & Real-World Staging Guidance:
Fitment Matrix: Fits Glock Generation 3 9mm, .40 S&W, and .357 SIG 3-pin compact and full-size frames (G17, G19, G22, G23, G31, G32) as well as aftermarket Polymer80 (PF940C / PF940v2), SCT 19/17, and Lone Wolf Freedom Armory frames. (Note: Does NOT include stripped receiver frame, main steel locking block, or magazine. Not compatible with Gen 4, Gen 5, slimline G43/43X/48, or large-frame .45 ACP/10mm receivers).
- Perform a complete firearm safety check: drop the magazine, lock the slide rearward, and visually inspect the chamber to verify zero live rounds are present.
- Install the magazine release button and magazine release spring rod into the front grip cavity of your stripped frame housing.
- Slide the slide lock leaf spring into the frame forward notch and set the slide lock bar in place with the groove facing rearward toward the shooter.
- Assemble the trigger spring into the trigger housing, linking it between the connector/housing loop and the rear loop of the trigger bar. Drop the trigger housing assembly into the rear frame cavity.
- Position your frame's steel locking block into the middle receiver well, then place the trigger shoe and trigger bar into position.
- Align the slide stop lever inside the frame slot, then drive the bottom Trigger Pin, top Locking Block Pin, and rear Housing Pin through the frame from left to right until fully seated flush.
- Reattach your complete upper slide assembly and perform a dry-fire function test to verify smooth trigger break, crisp reset, and slide stop lockback.
Key Features
- Complete Turnkey Lower Frame Kit: Includes all internal small parts, pins, levers, and springs required to complete a stripped Gen 3 lower.
- OEM Geometry & Tolerances: Manufactured to drop into original factory Glock Gen 3 frames and standard aftermarket custom modules without fitting.
- Standard 5.5 lb Trigger Pull Weight: Features a factory-spec connector and trigger spring for a crisp, clean break and tactile reset.
- Full Multi-Caliber Compatibility: Universally functions across 9mm Luger, .40 S&W, and .357 SIG Gen 3 frame configurations.
- Includes G17/G19 Slide Lock Spring: Outfitted with the essential leaf spring needed for compact and full-size frame takedown bar seating.
- Durable Heat-Treated Components: Hardened steel pins and anti-friction coated contact points prevent surface galling and premature wear.
Product Specifications
- Brand: XTS (Xtreme Tactical Sports / DMA Inc.)
- Model/Series: Gen 3 Frame Lower Parts Kit
- MPN / SKU: GL-LPK
- UPC: 767820110967
- Platform Compatibility: Glock Gen 3 17 / 19 / 22 / 23 / 31 / 32 / P80 PF940C / PF940v2
- Calibers Supported: 9mm Luger / .40 S&W / .357 SIG
- Trigger Pull Weight: 5.5 lbs (Standard Connector)
- Materials: Hardened Stamped Steel & High-Impact Polymer
- Included Items: Trigger w/ Bar, Trigger Housing w/ Ejector, 5.5lb Connector, Trigger Spring, Trigger Pin, Housing Pin, Locking Block Pin, Slide Lock, Slide Lock Spring, Slide Stop Lever w/ Spring, Mag Release, Mag Release Spring
- Weight: 4.0 oz
- Country of Origin: USA / Imported
