Yankee Hill Machine Co YHM sRx Mini Muzzle Brake 1 2x28 Black Oxide YHM 4401 MB 28 UPC 841812101505
Product Description
The Yankee Hill Machine Co.® (YHM) sRx Mini Muzzle Brake (SKU: YHM-4401-MB-28 / UPC: 841812101505) is a compact, zero-moving-parts suppressor host mount and sacrificial baffle engineered for 1/2"-28 TPI threaded barrels. Designed to minimize overall system length and front-end mass, this low-profile muzzle device serves as the barrel-side mounting interface for the YHM sRx Quick-Detach ecosystem, allowing shooters to bridge seamlessly onto any suppressor utilizing the industry-standard 1.375"-24 (HUB / Bravo) rear thread pitch via the YHM sRx Q.D. Adapter (YHM-4400).
Precision CNC-machined in the USA from high-strength, heat-treated 17-4 PH Stainless Steel and finished in a durable Black Oxide coating, the YHM-4401-MB-28 withstands extreme supersonic muzzle blast, rapid firing schedules, and abrasive carbon fouling. Unlike traditional taper-behind-thread mounts that expose mounting threads to hot propellant gases, the sRx architecture positions a precision internal taper seal forward of the external threads. When torqued into the sRx adapter, this forward taper locks the suppressor concentrically in place while completely isolating the threads from carbon buildup, debris, and thermal seizing.
Because the YHM sRx Mini Muzzle Brake utilizes a radially symmetrical, multi-port radial/crowned blast-baffle geometry, it requires zero rotational timing or shims during installation—eliminating alignment headaches on thin-shoulder barrels. Integrated 3/4" wrench flats at the rear collar provide positive mechanical purchase for accurate torque application, while its ultra-short profile acts as an effective sacrificial first baffle to protect your suppressor's primary blast baffle from premature erosion.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Compatible with barrels threaded in 1/2"-28 TPI with a proper 90-degree barrel shoulder and suppresses calibers up to the bore rating of the host suppressor when paired with the YHM sRx Q.D. Adapter (YHM-4400) on 1.375"-24 (HUB) suppressors. CRITICAL WARNING: This muzzle brake is NOT compatible with legacy YHM Phantom Q.D. adapters (YHM-3060) or Kurz Q.D. kits (YHM-3051), and does NOT thread directly into a 1.375"-24 suppressor body without the YHM-4400 sRx Adapter. Never use a crush washer to mount any suppressor host device; install directly against a clean, square barrel shoulder at 20 to 30 ft-lbs using Rocksett®.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before securing the upper receiver or barrel in an appropriate reaction rod or barrel vise.
- Thoroughly degrease both the barrel's 1/2"-28 male threads and the internal threads of the YHM sRx Mini Muzzle Brake using acetone or brake cleaner, removing any existing crush washers or factory thread protectors.
- Apply two small drops of high-temperature threadlocker (such as Rocksett®) to the clean barrel threads and thread the sRx Mini Muzzle Brake onto the barrel until it seats flush against the barrel shoulder (no timing shims are required).
- Engage the 3/4" wrench flats with a calibrated torque wrench and torque the muzzle brake to 20–30 ft-lbs; allow the threadlocker to cure fully per manufacturer specifications before suppressor attachment.
- Thread the YHM-4400 sRx Q.D. Adapter into your 1.375"-24 HUB suppressor, mate the suppressor onto the sRx Mini Muzzle Brake until the forward taper locks tight, and verify concentric bore alignment with a precision alignment rod prior to live-fire staging.
Key Features
- Forward Taper Seal Architecture: Positions the locking taper seal ahead of the external mounting threads to contain high-pressure gases and prevent carbon or debris fouling on the threads.
- 17-4 PH Stainless Steel Construction: CNC-machined from heat-treated stainless steel with a Black Oxide finish for superior resistance to blast baffle erosion and thermal fatigue.
- No-Timing Symmetrical Design: Eliminates the need for peel washers or timing shims while providing uniform gas dispersion and sacrificial blast-baffle protection.
- Ultra-Compact & Lightweight Footprint: Adds minimal overall length and weight (1.7 oz) to your rifle or PCC build compared to traditional ratchet-collar Q.D. systems.
- Zero Moving Parts: Eliminates springs, latches, and ratcheting collars that can wear out, bind under carbon fouling, or add unnecessary weight to the muzzle.
- HUB 1.375"-24 Ecosystem Ready: Pairs directly with the YHM sRx Q.D. Adapter (YHM-4400) for cross-compatibility across industry-standard HUB-threaded suppressors.
Product Specifications
- Brand: Yankee Hill Machine Co.® (YHM)
- Model/Series: sRx Mini Muzzle Brake
- MPN / SKU: YHM-4401-MB-28 / YHM4401MB28
- UPC: 841812101505
- Barrel Thread Pitch: 1/2"-28 TPI
- Suppressor Mount Interface: YHM sRx Taper Mount (Requires YHM-4400 Adapter for 1.375"-24 HUB)
- Material: 17-4 PH Stainless Steel
- Finish: Black Oxide
- Wrench Flats: 3/4"
- Weight: 1.7 oz
- Platform Compatibility: 1/2"-28 Threaded Barrels (AR-15, Bolt-Action Rifles, 9mm PCCs)
- Country of Origin: Made in the USA