Yankee Hill Machine Suppressor Gas Block YHM 9389 SS YHM9389SS UPC 816701014242
Product Description
The Yankee Hill Machine (YHM) Suppressor Gas Block (SKU: YHM-9389-SS / UPC: 816701014242) delivers a bombproof, maintenance-free solution for taming excessive bolt carrier velocity and gas blowback on dedicated suppressed AR-15 and AR-10 rifles. Rather than introducing fragile adjustment screws, springs, or detents that seize from carbon fouling, YHM engineered a permanently metered internal gas port that steps down suppressor-induced over-gassing at the source.
CNC-machined from solid 416 stainless steel and finished in a non-reflective matte bead-blasted texture, the YHM-9389-SS withstands extreme throat erosion, sustained full-auto thermal cycles, and corrosive propellant gases. Measuring just 0.930 inches in length, its streamlined low-profile geometry clears virtually all modern slim-profile free-float handguards without interference.
By restricting excess gas volume before it enters the gas tube, this dedicated suppressor gas block significantly reduces carrier slap, premature extractor and bolt lug wear, and toxic gas blowback to the shooter’s face. Dual bottom set screws anchor the block solidly to any standard 0.750-inch barrel journal for rock-solid zero retention under hard duty use.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Fits AR-15, M4, and AR-10/LR-308 barrels with a .750" diameter gas journal. CRITICAL WARNING: Fixed reduced-port design optimized for suppressed shooting—host rifles may short-stroke if fired unsuppressed, especially with weak .223 Remington steel-case ammunition or heavy H2/H3 buffers. Always dimple the barrel directly opposite the gas port (at 6 o’clock) for the rear set screw, degrease threads thoroughly, and apply high-temperature threadlocker (Loctite® 271 Red or Rocksett™) so thermal expansion does not back out the fasteners.
- Ensure the host upper receiver and barrel assembly are completely clear, magazine removed, and chamber visually and physically verified empty.
- Install the gas tube into the YHM-9389-SS gas block with the gas port hole facing downward, driving the included stainless steel roll pin flush using a 5/64" roll pin punch.
- Slide the gas block and tube assembly over the barrel’s .750" journal, leaving a standard ~0.025" (handguard cap thickness) clearance gap off the barrel shoulder if your barrel port was drilled for a cap, or indexing directly over the barrel gas port.
- Degrease the two bottom 10-32 set screws and barrel dimples, apply high-temp threadlocker, and torque the set screws evenly to 25–30 in-lbs.
- Verify straight gas tube alignment inside the upper receiver gas key channel before installing the free-float handguard and test-firing with your suppressor mounted.
Key Features
- Zero-Maintenance Fixed Metering: Permanently restricted internal gas orifice eliminates seizing adjustment screws, springs, and detents that fail under heavy carbon fouling.
- Reduced Bolt Velocity & Blowback: Drops carrier speed into the optimal cyclic envelope when shooting suppressed, extending bolt and extractor lifespan while minimizing gas-to-face.
- 416 Stainless Steel Construction: Precision CNC-machined from high-strength stainless steel to resist high-pressure gas cutting and thermal distortion.
- Ultra-Compact Low-Profile Footprint: 0.930" overall length fits effortlessly beneath narrow internal-diameter M-LOK and KeyMod free-float rail systems.
- Complete Hardware Included: Ships ready to install with two 10-32 × 3/16" cup-point set screws and a stainless steel gas tube roll pin.
Product Specifications
- Brand: Yankee Hill Machine Co., Inc. (YHM®)
- Model/Series: Dedicated Suppressor Gas Block (Low-Profile)
- MPN / SKU: YHM-9389-SS / YHM9389SS
- UPC: 816701014242
- Barrel Journal Diameter: 0.750"
- Material & Finish: 416 Stainless Steel, Matte Bead-Blasted
- Mounting Style: Dual Bottom Set Screws (10-32 × 3/16" Cup Point, 0.460" Spacing)
- Overall Length: 0.930"
- Platform Compatibility: AR-15, M16, M4, AR-10 / LR-308 (.750" Journal Barrels)
- Country of Origin: Made in the USA