*CONTACT US FOR A SPECIAL COUPON CODE!*
Zaffiri Precision® ZPS.2 Full-Size Optic-Ready Complete Slide Assembly – Fits Glock® 17 Gen 3 & Polymer80® PF940v2 – Flush & Crown 9mm Match Barrel – Trijicon® RMR Footprint – Black Cerakote Finish – CU-G17G3-ZPS2-RMR-BLK-FC-BN-BLNK
Product Description
The Zaffiri Precision® ZPS.2 Full-Size Optic-Ready Complete Slide Assembly (CU-G17G3-ZPS2-RMR-BLK-FC-BN-BLNK) represents a premier mechanical milestone in striker-fired handgun customization, aftermarket frame optimization, and high-efficiency tactical weapon staging, proudly machined and finished natively by American craftsmen in Largo, Florida, USA. Specifically engineered to drop onto factory Glock® 17 Gen 3 frames or custom Polymer80® PF940v2 workspace platforms, this pre-assembled complete upper deck eliminates the frustrating lag of standard OEM parts. While traditional factory polymer-frame slide assemblies rely on loose tolerances and blocky, slippery surface aesthetics that complicate high-stress manipulation loops, the Zaffiri ZPS.2 chassis introduces razor-sharp geometrical precision. This flagship combat and competition hardware asset (810220066416) delivers competition-grade speed and absolute alignment authority straight into your everyday carry (EDC) or tactical defensive setup.
The core structural superiority of this premium upgrade relies on its single-billet 17-4 stainless steel construction wrapped in a signature low-reflective Black Cerakote protective shroud. CNC-machined to exacting aerospace tolerances that surpass factory specifications, the ZPS.2 slide features tactical minimalistic window cutlines and deep geometric side serrations. This mass-optimized architecture accelerates slide cycling dynamics, significantly dampening snappy muzzle flip to facilitate lightning-fast split-second target-reacquisition tracks. Anchored inside this rigid steel tracking frame is a premium match-grade 9mm flush-and-crown barrel treated with an ultra-durable Black Nitride protective core. Machined from 416R weapon-grade stainless steel, this barrel eliminates excess front-end protrusion, maximizing your draw-stroke speed from close-confinement Kydex holsters while preserving target-grade ballistic accuracy.
The true operational triumph of this American-built modification engine centers on its **turn-key, zero-fail deployment readiness**. Shifting away from bare aftermarket slide projects that force armorers to wrestle with toxic tolerance stacking, backordered firing pins, or loose extractor assemblies, this package ships 100% complete with a **factory-installed internal Upper Parts Kit (UPK)**. The optics deck is pre-cut with a dedicated **Trijicon® RMR footprint**, locking down high-performance red dots like the Trijicon SRO or Holosun 407c/507c directly to the slide body via secure, thread-timed steel mounting posts. Outfitted out-of-the-box with pre-installed, high-visibility **blacked-out co-witness height iron sights** that provide a clean, uncluttered lower-third visual alignment loop through your electronic reticle, this 16.5-ounce tactical engine yields absolute mechanical and geometric dominance over your sidearm's performance matrix.
Includes: (1) Authentic Zaffiri Precision ZPS.2 Complete Slide Assembly (Black Cerakote Finish, Machined 17-4 Stainless Steel), (1) Zaffiri 416R Stainless Steel Match-Grade 9mm Flush & Crown Barrel (Black Nitride Base), (1) Pre-Installed Premium Internal Slide Upper Parts Kit with Channel Liner & Guide Rod Assembly, and (2) Pre-Installed Blacked-Out Suppressor/Co-Witness Height Night Sight Components, Packed inside Original Branded Factory Sealed Protective Retail Presentation Storage Boxing.
*Administrative Armorer Staging, Optic Torque Limits & Frame Track Fitting Guidance: The Zaffiri Precision Complete Slide is a high-tolerance drop-in performance part. **CRUCIAL PLATFORM GENERATION WARNING:** This complete upper is engineered exclusively for **Generation 3 Glock® 17 sub-models or matching 100% scaled aftermarket receiver blocks like the Polymer80 PF940v2; it is completely incompatible with Gen 4, Gen 5, or compact Glock 19 frame configurations**. When mounting your chosen red dot optic inside the RMR footprint, **strictly utilize the specialized optic screws provided by Zaffiri and verify your torque wrench does not exceed 15 inch-pounds; over-tightening will strip the internal thread paths or crush the right-side extractor spring channel liner, inducing permanent failure-to-extract stumbles**. Because custom 17-4 stainless steel slides are machined to tighter defensive tolerances than loose factory polymer molds, apply a conservative coating of high-viscosity firearms lubricant along the internal slide rails during your initial 100-round bench break-in loop. Explicitly verify your firearm is completely unloaded, the chamber is clear, and the workspace is proven safe before executing slide assembly transfers.
Key Features
- Monolithic 17-4 Stainless Core: Precision CNC-machined from a single block of high-tensile 17-4 weapon-grade stainless steel to eliminate frame deflection and guarantee longevity.
- Turn-Key Complete Assembly: Ships with a factory-vetted upper parts kit, internal channel liner, and standard recoil spring guide rod pre-installed to bypass custom bench fitting loops.
- Pre-Cut Trijicon RMR Footprint: Features a low-profile optic mounting pocket to mount elite micro red dots like the Trijicon SRO, Holosun 507C, or HS508T with zero intermediate adapter flex.
- Flush & Crown 416R Barrel: Match-grade 9mm barrel utilizes a deep target crown and a flush-cut muzzle to optimize defensive accuracy lines while preventing holster drag.
- Blacked-Out Co-Witness Sights: Raised co-witness height iron sights sit perfectly within the lower-third view of your dot optic, ensuring a zero-fail tactical tracking backup loop.
- Durable Black Cerakote Coating: Coated in premium H-series Black Cerakote to shield raw steel surfaces from abrasive holster friction, sweat acidity, and harsh chemical cleaners.
Product Specifications
- Brand: Zaffiri Precision® (Precision machined, heat-treated, and custom Cerakoted natively by American engineers in Largo, Florida, USA)
- Product Line: High-Performance Custom Pistol Slides & Complete Drop-In Upper Assemblies
- Model Series Designation: ZPS.2 Custom Optic-Ready Complete Slide – Glock® 17 Gen 3 Edition
- SKU / MPN: CU-G17G3-ZPS2-RMR-BLK-FC-BN-BLNK (Alternative Identifiers: G17G3-ZPS2-FCBO-BLK-BLK / ZAF810220066416)
- UPC Barcode Number: 810220066416
- Receiver Frame Compatibility: Glock® 17 Gen 3 Platform Standard (Natively Fits Polymer80® PF940v2 Frames)
- Caliber Optimization: 9x19mm Parabellum / 9mm Luger High-Velocity Arrays
- Slide Material Architecture: Monolithic Billet 17-4 PH Stainless Steel structural framework
- Slide Coating Finish: Heavy-Duty Type H Low-Reflective Matte Black Cerakote Protection Shroud
- Optics Cut Configuration: Pre-Machined Trijicon® RMR / SRO / Holosun 407c & 507c Interface Footprint
- Barrel Material & Treatment: 416R Match-Grade Stainless Steel treated with Low-Friction Black Nitride (BN)
- Barrel Muzzle Profiling: Precision Deep Target Facing Flush and Crown (FC) Geometry Cut
- Iron Sights Profile: Suppressor/Co-Witness Height Solid Blacked-Out Target Sights
- Internal Slide Setup: Factory Loaded Premium Steel Upper Parts Kit (UPK) & Striker Channel Liner
- Mechanical Installation Class: Drop-In Toolless Receiver Rack Frame Integration Swap
- Product Net Component Weight: ~16.50 oz (~1.03 lbs) Fully Dressed Complete Upper Package
- Total Packaging Shipping Mass: ~1.50 lbs (Enclosed Inside Secure Custom Heavy Foam-Padded Retail Storage Presentation Boxing)
