*CONTACT US FOR A SPECIAL COUPON CODE*
BCM Gunfighter Stock Mod 1 SOPMOD Compartment Black BCM GFSK MOD1 SPMD BLK UPC 812526020819
Product Description
The Bravo Company Manufacturing (BCM®) Gunfighter Stock Mod 1 — SOPMOD Compartment in Black (SKU: BCM-GFSK-MOD1-SPMD-BLK / UPC: 812526020819) is a mission-driven collapsible buttstock built for duty-grade AR-15, M4, and AR-10 platforms utilizing 1.148" Mil-Spec receiver extensions. Developed with direct input from combat veterans and Tier-1 operational end-users, the Mod 1 SOPMOD bridges the gap between sleek, snag-free carbine ergonomics and the enhanced cheek weld and onboard battery storage required by modern night-vision and illuminated-optic setups.
Injection-molded in the USA from proprietary, high-impact glass-filled polymer, the Gunfighter Mod 1 resists extreme thermal cycling, heavy drop impacts, and exposure to harsh bore solvents and lubricants. At the heart of the chassis is BCM’s patented internal latch system, which completely eliminates external exposed levers that commonly snag on plate carriers, chest rigs, and sling hardware while maintaining rock-solid, zero-rattle lockup on both standard carbine and VLTOR A5 intermediate buffer tubes.
Featuring a wider, sculpted cheek rest than the minimalist Mod 0, the Mod 1 SOPMOD houses dual water-resistant battery storage compartments accessible via removable rubberized end caps to hold CR123A or AA cells for optics, weapon lights, and laser illuminators. Integrated ambidextrous anti-rotation QD swivel sockets, dual 1.25-inch web sling slots, and a removable, textured rubber buttpad give shooters full modular control over sling routing and shoulder placement during dynamic transitions.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Fits all AR-15, M4, and AR-10 / LR-308 lower receivers fitted with a 1.148" outer diameter Mil-Spec carbine or VLTOR A5 receiver extension. CRITICAL EXCLUSION: Will NOT fit 1.168" Commercial-Spec receiver extensions (often recognizable by a slanted rear end) or fixed A1/A2 rifle tubes. Do not force the stock onto an out-of-spec commercial tube, as this will bind the internal latch and damage the polymer channel.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning work.
- Inspect your receiver extension to confirm it is a flat-backed 1.148" Mil-Spec tube, and lightly wipe the exterior tube rails with a clean cloth to remove grit or heavy grease.
- Align the Gunfighter Mod 1 channel with the bottom indexing track of the receiver extension and slide the stock forward until the internal locking pin contacts the front of the tube rail.
- Squeeze the lower rear toe of the adjustment latch upward (or pull the internal release bar downward depending on indexing position) to retract the locking pin, allowing the stock to slide onto the receiver extension.
- Release the latch and cycle the stock across all receiver extension positions to confirm positive mechanical engagement in every detent hole, then verify both QD sockets lock a standard swivel securely before live-fire staging.
Key Features
- Snag-Free Patented Latch System: Internal locking mechanism eliminates external levers and sharp edges that catch on tactical gear, webbing, and clothing.
- Enhanced SOPMOD Cheek Weld: Sculpted, wider upper profile provides consistent eye-box alignment and repeatable cheek placement for magnified optics and night-vision setups.
- Water-Resistant Battery Storage: Dual integrated side compartments store CR123A or AA batteries securely with O-ring sealed plugs to protect electronics from moisture and debris.
- Ambidextrous Sling Mounting: Equipped with dual anti-rotation QD swivel sockets on both sides plus two traditional 1.25-inch web sling pass-through slots.
- Modular Non-Slip Buttpad: Removable, color-matched molded rubber buttpad features a serrated toe for rapid, slip-free shoulder indexing over body armor.
Product Specifications
- Brand: Bravo Company Manufacturing (BCM®)
- Model/Series: Gunfighter Stock Mod 1 — SOPMOD Compartment
- MPN / SKU: BCM-GFSK-MOD1-SPMD-BLK / BCMGFSKMOD1SPMDBLK
- UPC: 812526020819
- Material: High-Strength Impact-Resistant Polymer & Molded Rubber
- Finish / Color: Matte Black
- Receiver Extension Compatibility: 1.148" Mil-Spec Carbine & VLTOR A5 Tubes Only
- Sling Mounts: Dual Ambidextrous Anti-Rotation QD Sockets & Dual 1.25" Web Slots
- Platform Compatibility: AR-15 / M4 / M16 / AR-10 / LR-308 (Mil-Spec Tube Equipped)
- Country of Origin: United States