*CONTACT US FOR A SPECIAL COUPON CODE*
Midwest Industries GEN2 Two Piece Free Float Carbine Length Handguard 7 Inch Black MCTAR 20G2 UPC 816537010982
Product Description
The Midwest Industries® Gen2 Two-Piece Free-Float Carbine Length Handguard (SKU: MCTAR-20G2 / UPC: 816537010982) upgrades standard Mil-Spec AR-15 and M4 carbines to a true free-floating quad-rail architecture without requiring removal of the pinned A2 front sight base, muzzle device, or barrel nut. Engineered for duty carbines, patrol rifles, and classic M4 SOPMOD-inspired builds, this 7.0-inch handguard eliminates sling and bipod barrel deflection to improve mechanical accuracy and consistency.
Precision CNC-machined in the USA from 6061-T6 aircraft-grade aluminum, the MCTAR-20G2 is finished in a non-reflective MIL-A-8625 Type III Class 2 hardcoat anodizing for maximum resistance to surface abrasion, heat, and harsh cleaning solvents. Its rugged two-piece upper and lower halves clamp directly around a standard USGI barrel nut via a precision-machined internal collar and four recessed high-strength steel fasteners, creating a monolithic-feeling top rail bridge with zero rotational play.
Equipped with four full-length, laser T-marked MIL-STD-1913 Picatinny rails, the Gen2 handguard provides generous mounting real estate for weapon lights, laser aiming modules, vertical foregrips, and rail panels. Five integrated anti-rotation Quick Detach (QD) sling swivel sockets allow immediate ambidextrous two-point or single-point sling staging right out of the box without bulky external rail adapters.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Fits Mil-Spec AR-15 / M4 upper receivers equipped with a standard USGI barrel nut and carbine-length gas system (compatible with pinned A2 front sight bases or low-profile gas blocks). CRITICAL WARNING: Installation requires cutting off the factory delta ring, weld spring, and C-clip snap ring (using a Dremel/rotary cut-off wheel or dedicated delta-ring cutters) so the internal clamp collar can seat directly onto the USGI barrel nut—do NOT attempt to install over an intact delta ring. Will NOT fit proprietary barrel nuts, gas-piston uppers, or AR-10 (.308) receivers. Torque the four clamping screws evenly in a criss-cross pattern to 30–35 in-lbs with blue threadlocker (Loctite 242/243).
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty before beginning disassembly.
- Remove the existing drop-in handguards, then carefully cut and remove the aluminum delta ring, steel weld spring, and C-clip snap ring from the barrel nut without nicking the upper receiver threads or barrel nut teeth. (If keeping a pinned A2 front sight base, cut and remove the front round/triangular handguard cap as well.)
- Clean the exposed USGI barrel nut with degreaser so the clamping interface is free of oil or grease, then position the upper half of the MCTAR-20G2 onto the barrel nut, aligning the top rail T-marks seamlessly with the upper receiver Picatinny rail.
- Mate the lower handguard half to the upper half around the barrel nut, apply a drop of medium-strength blue threadlocker to the four clamping screws, and gradually torque them evenly in an X-pattern to 30–35 in-lbs.
- Inspect the seam between the upper and lower rails for uniform gap closure, verify free-float clearance around the gas tube and barrel, and test sling lockup in the QD sockets before live-fire zeroing.
Key Features
- No-Barrel-Nut-Removal Free-Float Design: Clamps directly onto a standard USGI barrel nut after removing the delta ring, preserving pinned A2 front sight bases and pinned/welded muzzle devices.
- 6061-T6 Aluminum & Type III Hardcoat Anodizing: CNC-machined billet construction delivers extreme structural rigidity while maintaining a lightweight 9.7 oz profile.
- Four Laser T-Marked 1913 Picatinny Rails: Full-length top, bottom, and side MIL-STD-1913 rails allow repeatable mounting of lights, lasers, grips, and rail covers.
- Five Anti-Rotation QD Sling Swivel Sockets: Built-in steel-lined QD cups at the front and rear provide versatile ambidextrous sling mounting without twist.
- 1.50" Internal Diameter Clearance: Generous inner bore clears standard carbine gas tubes and low-profile gas blocks without barrel contact.
Product Specifications
- Brand: Midwest Industries®
- Model/Series: Gen2 Two-Piece Free-Float Handguard
- MPN / SKU: MCTAR-20G2 / MCTAR20G2
- UPC: 816537010982
- Length: 7.0 Inches (Carbine Length)
- Internal / External Dimensions: 1.50" ID / 2.38" W x 2.50" H
- Material: 6061-T6 Aircraft-Grade Aluminum
- Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized Black
- Mounting Interface: Standard USGI AR-15 Barrel Nut (Delta Ring Removed)
- Platform Compatibility: Mil-Spec AR-15 / M4 Carbine-Length Gas Systems
- Country of Origin: Made in the USA