One Hundred Concepts ShockCollar Protective Ring - Accessory Anchor for LightCap System, Fits 32mm Tactical Weapon Lights, Ruggedized Polymer, Matte Black Finish - OHC-CLR-32mm
Product Description
Securing high-output tactical weapon lights against lens damage, carbon fouling build-up, and white-light negligent discharges downrange requires a staging anchor built to resist intense structural stress. Flimsy rubber bands or generic electrical tape patches melt away rapidly under intense muzzle blast heat or leave sticky, messy residue lines across your weapon light's bezel, resulting in lost lens covers and unprotected glass on your bench. The **One Hundred Concepts® ShockCollar 32mm Weapon Light Accessory (OHC-CLR-32mm)** completely flatlines this tactical gear bottleneck, supplying a heavy-duty, clamp-retained structural collar explicitly engineered to anchor your forward protection lines.
Proudly engineered, molded, and field-torture tested in the United States by One Hundred Concepts, this lightweight light retention enhancement ring is molded from a high-tensile, **impact-resistant structural polymer matrix**. Designed explicitly as a rock-solid upgrade for their signature LightCap™ system, this 32mm collar slips securely over the main body tube of premier high-candela tactical weapon lights. The specialized split-jaw mounting architecture features an integrated tension system locked down by an included **steel cross-bolt and hex nut assembly** to guarantee zero slip under hard recoil. The unibody framework provides molded recess tracks and dual side tie-down eyelet tabs built to capture heavy-duty shock cord lines, keeping your protective caps locked tight against high-frequency weapon vibrations.
Finished in a non-reflective matte black tactical finish to eliminate position-revealing glare signatures, this turn-key upgrade delivers absolute control stability straight to your workbench.
*Armorer Bench Notes & Real-World Light Staging Guidance: The One Hundred Concepts OHC-CLR-32mm component pack arrives workspace ready, containing 1x precision-sized 32mm polymer ShockCollar split ring, a selection of different length steel clamping socket screws with a matching hex nut, and a length of high-stretch tactical elastic shock cord. PROPRIETARY WEAPON LIGHT INTERFACE MATRIX: This specific 32mm size-tier split ring is engineered natively, strictly, and precisely to clamp onto **tactical weapon lights featuring a 32mm (1.25-inch) external bezel or body diameter standard**. *Host Weapon Light Sizing Match:* It is optimized to lock down onto popular high-candela light heads including the **SureFire® Turbo Series (M640DFT / M340DFT), HRT AWLS, Cloud Defensive® REIN 3.0, and Modlite® OKW/PLHV2 heads** on your bench. Co-Dependent Component Staging: This collar acts as a rigid structural retention anchor block, working directly alongside the One Hundred Concepts LightCap modules to shield lenses from carbon blast and reflective glare variables. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host rifle platform is completely clear of live ammunition, the magazine is separated, and the chamber area is empty and safe. 2. Clean the weapon light's exterior bezel mounting surface with a dry microfiber cloth to clear away loose carbon scaling or lens oil. 3. Slip the ShockCollar split ring over the weapon light body, positioning it immediately behind the main bezel head assembly slot. 4. Insert the appropriate length socket screw through the lower tension ears, thread the hex nut on, and hand-snug clockwise until the collar clamps firmly against the light body. 5. Guide the elastic shock cord strands through the pre-molded side retention eyelet tabs on the collar frame. 6. Pull the shock cord forward, loop it over the top tracking notches of your LightCap cover, and tie a secure retention knot to set your preferred spring tension baseline before heading out downrange.*
Key Features
- Engineered LightCap Integration: Designed explicitly to fit seamlessly with the LightCap system, providing a secure, ruggedized anchor point for elastic retention cords on tactical weapon lights.
- Bolt-Clamped Tension Security: Features a mechanical split-jaw design locked down by steel cross-bolts, guaranteeing the ring will not slide forward under violent muzzle blast pulses.
- Tough High-Memory Polymer: Stamped from an advanced structural polymer compound that ignores extreme muzzle radiator heat soak and resists dropping cracks.
- Anti-Glint Matte Black Finish: Covered in a non-reflective matte black finish to blend with your weapon light body and eliminate potential glare signatures in the field.
- Molded Shock Cord Channels: Built with dedicated slot guides and eyelets to channel elastic cords without pinching, preventing early cord fraying and wear.
- 32mm Precision Compatibility: Tailored specifically to envelope the latest generation of 32mm high-candela scouting lights without slipping or blocking rail mount arms.
Product Specifications
- Brand: One Hundred Concepts® (United States)
- Model Line: High-Performance Tactical Light Accessories & Flashlight Signature Mitigation Gear
- MPN/SKU Code: OHC-CLR-32mm (32mm Weapon Light Configuration Base SKU)
- UPC Code Profile: 3511144132573
- Weapon Light Bezel Size Fitment: 32mm Diameter Profile Standards (Optimized for SureFire Turbo, Cloud REIN 3.0, and HRT AWLS)
- Component Functional Class: Secondary Mechanical Retention Anchor Ring for Elastic Shock Cord Light Covers
- Structural Material Base: High-Tensile Injection-Molded Impact-Stabilized Tactical Polymer Composite
- Clamping Fastener Elements: Premium Hardened Carbon Steel Socket Screws and Matching Hex Nut Set
- Included Auxiliary Cordage: High-Memory UV-Resistant Industrial Elastic Core Braided Shock Cord
- Exterior Color Scheme: Solid Matte Black Non-Reflective Satin Synthetic Material Finish
- Hardware Attachment Style: Cross-Bolt Mechanical Clamp Placement with Structural Eyelet Locks
- Full Kit Component Checklist: 1x 32mm ShockCollar Ring, 3x Variable Tension Screws, 1x Nut, 1x Elastic Cord Strand
- Packaging Format Class: Factory Original Sealed Poly Presentation Bag with Branded Inventory Header Inserts
- Product Type Category: Rifle Weapon Light Components / Tactical Flashlight Spares & Protective Gear Attachments
- Overall Outer Ring Width: ~1.55 Inches (~39.3 mm Standard Clamped External Dimension Clearances)
- Net Component Module Mass: ~0.22 Ounces (~6.2 Grams Ultra-Lightweight Dynamic System Component Weight)
- Global Quality Certifications: Built strictly to Professional Duty Operational Fielding Requirements
- Warranty Tracking Protection: Fully Backed by One Hundred Concepts Factory Performance Defect Coverage
