One Hundred Concepts ShockCollar Protective Ring - Accessory Anchor for ScopeCap System, Fits Size 1 Optics, Ruggedized Polymer, Matte Black Finish - OHC-CLR-1
Product Description
Securing high-end variable magnifying optics against lens damage and glint reflection downrange requires a staging anchor that refuses to slip under hard field service. Traditional rubber bands or universal electrical tape patches rot under extreme environmental sun heat or leave sticky residue lines over your precision dials, leading to lost lens covers and exposed objective elements on your bench. The **One Hundred Concepts® ShockCollar Size 1 Accessory (OHC-CLR-1)** completely flatlines this tactical gear bottleneck, providing a heavy-duty, form-fitted structural collar built to anchor your focal protection lines seamlessly.
Proudly engineered, molded, and field-torture tested in the United States by One Hundred Concepts, this lightweight optical retention enhancement ring is cut from a high-tensile **impact-resistant structural polymer matrix**. Designed explicitly as a modular upgrade for their signature ScopeCap™ system, this Size 1 collar slips securely over the main outer objective bezel walls of your scope. It features molded recess channels and integrated tie-down eyelet tabs built to capture heavy-duty shock cord lines, ensuring your protective caps stay tightly secured under extreme muzzle blast shocks or dense brush movement.
Finished in a completely non-reflective matte black tactical armor jacket to eliminate positioning signatures, this turn-key armorer upgrade ensures flawless optic tracking straight from your workbench.
*Armorer Bench Notes & Real-World Optic Staging Guidance: The One Hundred Concepts OHC-CLR-1 component pack arrives workspace ready, containing 1x precision-sized polymer ShockCollar ring and a length of high-stretch tactical elastic shock cord wire. PROPRIETARY OPTIC RETENTION INTERFACE MATRIX: This specific size-tier ring is engineered natively, strictly, and precisely to fit **Size 1 scope objective housings or equivalent outer diameter lens bezels**. *Host Optics Sizing Match:* It is optimized to lock down onto popular low-power variable optics (LPVO) featuring **1-6x24mm or 1-8x24mm objective bells (typically measuring roughly 30mm external diameter formatting)** on your bench. Co-Dependent Component Staging: This collar acts as a secondary structural retention anchor block, working directly alongside the One Hundred Concepts ScopeCap or ScopeCap Pro modules to lock lenses safely away from glare variables. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host rifle platform is completely clear of live ammunition, the magazine is separated, and the chamber area is empty and safe. 2. Wipe the forward objective bezel rim of your rifle scope clean with a dry utility patch to clear away any loose gun oil or trail dust tracking. 3. Slide the ShockCollar ring over the forward lens housing body, positioning it immediately behind your main flip cover or ScopeCap seating zone. 4. Guide the elastic shock cord strands through the pre-molded side retention eyelet tabs on the collar frame. 5. Pull the shock cord forward, loop it over the top tracking notches of your lens cover cap, and tie a firm retention knot at your preferred tension break. 6. Pull the cover down firmly to test spring retention loops before rolling out downrange.*
Key Features
- Engineered ScopeCap Integration: Designed explicitly to fit seamlessly with the ScopeCap system, providing a secure, ruggedized anchor point for elastic retention cords.
- Tough High-Memory Polymer: Stamped from an advanced structural polymer compound that ignores extreme scope barrel heat soak and resists dropping cracks.
- Anti-Glint Matte Black Finish: Covered in a non-reflective matte black finish to blend with your scope body and eliminate potential glare signatures in the field.
- Molded Shock Cord Channels: Built with dedicated slot guides and eyelets to channel elastic cords without pinching, preventing early cord fraying and wear.
- Low-Profile Snag-Free Layout: Features a slim, form-fitting design that wraps tightly around the scope barrel, preventing snagging on tree branches or web gear.
- Toolless Slip-On Staging: Installs in under a minute on the bench by simply sliding into position, without requiring messy adhesives, tapes, or complex tools.
Product Specifications
- Brand: One Hundred Concepts® (United States)
- Model Line: High-Performance Tactical Optic Accessories & Glint Signature Mitigation Gear
- MPN/SKU Code: OHC-CLR-1 (Size 1 Configuration Base SKU / Variant Index 1)
- UPC Code Profile: 3511144142206
- Optic Barrel Size Fitment: Size 1 Profile Standards (Optimized for 24mm LPVO Objective External Rings)
- Component Functional Class: Secondary Retention Anchor Ring for Elastic Shock Cord Scope Covers
- Structural Material Base: High-Tensile Injection-Molded Impact-Stabilized Tactical Polymer Composite
- Included Auxiliary Cordage: High-Memory UV-Resistant Industrial Elastic Core Braided Shock Cord
- Exterior Color Scheme: Solid Matte Black Non-Reflective Satin Synthetic Material Finish
- Hardware Attachment Style: Friction Fit Outer Sleeve Placement with Mechanical Cord Lock Interface
- Full Kit Component Checklist: 1x Size 1 ShockCollar Polymer Sleeve, 1x Premium Stretch Cord Strand Only
- Packaging Format Class: Factory Original Sealed Poly Presentation Bag with Branded Inventory Header Inserts
- Product Type Category: Rifle Scope Components / Optics Spares & Protective Gear Attachments
- Overall Outer Ring Width: ~1.35 Inches (~34.2 mm Standard Lateral External Dimension Clearances)
- Net Component Module Mass: ~0.15 Ounces (~4.2 Grams Ultra-Lightweight Dynamic System Component Weight)
- Global Quality Certifications: Built strictly to Professional Duty Operational Fielding Requirements
- Warranty Tracking Protection: Fully Backed by One Hundred Concepts Factory Performance Defect Coverage
