One Hundred Concepts ShockCollar Protective Ring - Accessory Anchor for ScopeCap System, Fits Size 2 Optics, Ruggedized Polymer, Matte Black Finish - OHC-CLR-2
Product Description
Securing high-end magnifying optics against objective lens damage and forward glint reflection downrange requires a staging anchor that refuses to yield under heavy physical service. Flimsy rubber bands or standard electrical tape patches melt away under intense barrel heat soak or leave messy, sticky residue tracks across your precision adjustment bells, resulting in lost lens covers and exposed optical glass on your bench. The **One Hundred Concepts® ShockCollar Size 2 Accessory (OHC-CLR-2)** completely flatlines this tactical gear bottleneck, supplying a heavy-duty, clamp-retained structural collar explicitly built to anchor your focal protection lines.
Proudly engineered, molded, and field-torture tested in the United States by One Hundred Concepts, this lightweight optical retention enhancement ring is molded from a high-tensile, **impact-resistant structural polymer matrix**. Designed explicitly as a rock-solid upgrade for their signature ScopeCap™ system, the Size 2 collar slips securely over intermediate magnifying scope housings. Unlike friction-only sleeves, the Size 2 architecture features an integrated tension split-jaw system locked down by an included **steel cross-bolt and hex nut assembly** to guarantee zero slip. The unibody framework provides molded recess tracks and dual side tie-down eyelet tabs built to capture heavy-duty shock cord lines, keeping your protective caps locked tight against heavy recoil force.
Finished in a non-reflective matte black tactical finish to eliminate position-revealing glare signatures, this turn-key upgrade delivers absolute control stability straight to your workbench.
*Armorer Bench Notes & Real-World Optic Staging Guidance: The One Hundred Concepts OHC-CLR-2 component pack arrives workspace ready, containing 1x precision-sized polymer ShockCollar split ring, a selection of different length steel clamping socket screws with a matching hex nut, and a length of high-stretch tactical elastic shock cord. PROPRIETARY OPTIC RETENTION INTERFACE MATRIX: This specific size-tier split ring is engineered natively, strictly, and precisely to clamp onto **Size 2 scope objective bells or intermediate magnification housing tubes**. *Host Optics Sizing Match:* It is optimized to lock down onto popular precision scopes featuring **objective bells measuring roughly 39.5mm to 43mm external diameter formatting (often matching standard 32mm to 36mm internal objective lens groupings)** on your bench. Co-Dependent Component Staging: This collar acts as a rigid structural retention anchor block, working directly alongside the One Hundred Concepts ScopeCap or ScopeCap Pro modules to shield lenses from glare variables. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host rifle platform is completely clear of live ammunition, the magazine is separated, and the chamber area is empty and safe. 2. Clean the scope's forward objective bell tracking surface with a dry microfiber cloth to clear away loose gun oil or trail dust. 3. Slip the ShockCollar split ring over the objective barrel housing, positioning it immediately behind your main flip cover or ScopeCap seating zone. 4. Insert the appropriate length socket screw through the lower tension ears, thread the hex nut on, and hand-snug clockwise until the collar clamps firmly against the scope body. 5. Guide the elastic shock cord strands through the pre-molded side retention eyelet tabs on the collar frame. 6. Pull the shock cord forward, loop it over the top tracking notches of your lens cover cap, and tie a secure retention knot to set your preferred spring tension baseline before head downrange.*
Key Features
- Engineered ScopeCap Integration: Designed explicitly to fit seamlessly with the ScopeCap system, providing a secure, ruggedized anchor point for elastic retention cords.
- Bolt-Clamped Tension Security: Features a mechanical split-jaw design locked down by steel cross-bolts, guaranteeing the ring will not slide forward under heavy recoil pulses.
- Tough High-Memory Polymer: Stamped from an advanced structural polymer compound that ignores extreme scope barrel heat soak and resists dropping cracks.
- Anti-Glint Matte Black Finish: Covered in a non-reflective matte black finish to blend with your scope body and eliminate potential glare signatures in the field.
- Molded Shock Cord Channels: Built with dedicated slot guides and eyelets to channel elastic cords without pinching, preventing early cord fraying and wear.
- Low-Profile Snag-Free Layout: Features a slim, form-fitting design that wraps tightly around the scope barrel, preventing snagging on tree branches or web gear.
Product Specifications
- Brand: One Hundred Concepts® (United States)
- Model Line: High-Performance Tactical Optic Accessories & Glint Signature Mitigation Gear
- MPN/SKU Code: OHC-CLR-2 (Size 2 Configuration Base SKU / Variant Index 2)
- UPC Code Profile: 3511144142213
- Optic Barrel Size Fitment: Size 2 Profile Standards (Optimized for ~39.5mm to 43mm Outer Diameter Objectives)
- Component Functional Class: Secondary Mechanical Retention Anchor Ring for Elastic Shock Cord Scope Covers
- Structural Material Base: High-Tensile Injection-Molded Impact-Stabilized Tactical Polymer Composite
- Clamping Fastener Elements: Premium Hardened Carbon Steel Socket Screws and Matching Hex Nut Set
- Included Auxiliary Cordage: High-Memory UV-Resistant Industrial Elastic Core Braided Shock Cord
- Exterior Color Scheme: Solid Matte Black Non-Reflective Satin Synthetic Material Finish
- Hardware Attachment Style: Cross-Bolt Mechanical Clamp Placement with Structural Eyelet Locks
- Full Kit Component Checklist: 1x Size 2 ShockCollar Ring, 3x Varial Tension Screws, 1x Nut, 1x Elastic Cord Strand
- Packaging Format Class: Factory Original Sealed Poly Presentation Bag with Branded Inventory Header Inserts
- Product Type Category: Rifle Scope Components / Optics Spares & Protective Gear Attachments
- Overall Outer Ring Width: ~1.85 Inches (~47.0 mm Standard Clamped External Dimension Clearances)
- Net Component Module Mass: ~0.25 Ounces (~7.0 Grams Ultra-Lightweight Dynamic System Component Weight)
- Global Quality Certifications: Built strictly to Professional Duty Operational Fielding Requirements
- Warranty Tracking Protection: Fully Backed by One Hundred Concepts Factory Performance Defect Coverage
