*CONTACT US FOR A SPECIAL COUPON CODE*
Sharps Bros. Gen 3 Precision Metal Grip Module - Fits Sig Sauer P365 X-Macro / Fire Control Units (FCU), CNC Machined 7075-T6 Billet Aluminum, Integrated 1913 Picatinny Accessory Rail, Milled Flared Magwell & Undercut Trigger Guard, Olive Drab (OD) Green Anodized Finish w/ Black Grips - SBGM05-G3-OD / 850057873740
Product Description
Upgrading a Sig Sauer® P365 X-Macro micro-compact pistol for EDC carry, tactical applications, or competitive shooting demands a frame engineered with higher structural rigidity than factory polymer modules. Standard polymer grip modules flex during rapid slide cycling and recoil, adding unwanted muzzle rise and limiting accessory rail torque on your bench. The **Sharps Bros.® Gen 3 Metal Grip Module for Sig P365 X-Macro (SBGM05-G3-OD / 850057873740)** flatlines these frame flex limitations, replacing polymer with a precision-machined **7075-T6 billet aluminum chassis** in a tactical Olive Drab (OD) Green anodized finish paired with textured black side grip panel inserts.
Proudly designed, CNC-milled, and hard-coat anodized in the United States by Sharps Bros., the Gen 3 module takes P365 customization to an elite level. Carved from high-strength aircraft-grade **7075-T6 aluminum**, it features an aggressive undercut trigger guard for a higher grip axis, a subtly flared magwell for lightning-fast reload seating, and an integrated **1913 Picatinny accessory rail** that replaces proprietary Sig rail geometry. Outfitted with ergonomic black side grip panels that offer tactile traction without snagging clothing during concealed carry draws, this drop-in aluminum module completely elevates your P365 Fire Control Unit (FCU) straight from your armorer bench.
Engineered to house factory Sig Sauer P365 Fire Control Units and accept 17-round X-Macro magazines, this factory-calibrated metal grip module guarantees custom ergonomics and rock-solid rigidity directly from your workspace bench.
*Armorer Bench Notes & Real-World FCU Staging Guidance: The Sharps Bros. SBGM05-G3-OD module arrives workspace ready, containing the OD Green anodized aluminum grip chassis, pre-installed black grip panels, and magazine release assembly. SIG SAUER P365 FCU & SLIDE LENGTH COMPATIBILITY MATRIX: This module is engineered natively to accept all **Sig Sauer P365 Fire Control Units (FCUs)** without manual safety levers. *Slide & Barrel Length Checklist:* Flush-fits with **P365 X-Macro (3.1" barrel w/ integrated comp or 3.7" X-Macro slide)** and **P365XL slides**; standard 3.1" non-compensated P365 slides will function but leave the recoil spring dust cover extended past the muzzle. Accepts standard **17-round X-Macro magazines** (10/12/15-round P365 mags are too short unless equipped with X-Macro floorplate extensions). Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host P365 pistol is completely clear of live ammunition, the magazine is removed, and the chamber is checked safe and empty. 2. Lock the slide back, rotate the takedown lever downward, and remove the slide assembly from the factory frame. 3. Push out the rear receiver retention pin on your factory module and lift the P365 FCU upward and forward out of the polymer seat. 4. Insert the FCU toe first into the Sharps Bros. aluminum module housing, press down until seated, and reinsert the rear retention pin on your bench. 5. Install your slide assembly onto the metal frame rails, rotate the takedown lever up, insert a clear 17-round X-Macro magazine, and perform a manual function and reset check before rolling downrange.*
Key Features
- Precision CNC-Machined 7075-T6 Aluminum: Carved from solid billet 7075-T6 aircraft aluminum to eliminate frame flex and provide enhanced rigidity for faster target recovery.
- Integrated Standard 1913 Picatinny Rail: Replaces proprietary Sig rail cuts with a true MIL-STD-1913 Picatinny rail section to mount standard weapon lights (e.g., Streamlight TLR-7 Sub 1913 / SureFire X300).
- Enhanced Undercut & Extended Beavertail: Deeply undercut trigger guard and contoured rear beaver tail allow a higher, more aggressive hand grip to mitigate muzzle rise.
- Subtly Flared Magazine Well: Integrated bottom magwell flair guides 17-round X-Macro magazines smoothly into the grip channel during high-stress reload strings.
- Replaceable Black Side Grip Panels: Textured black composite side panels provide a firm, non-abrasive grip texture that won't irritate skin during concealed IWB carry.
- Tactical Olive Drab (OD) Green Anodized Finish: Durable OD Green protective anodized finish offers high surface hardness, corrosion defense, and specialized tactical color styling.
Product Specifications
- Brand: Sharps Bros.® (Glenrock, WY / Made in the USA)
- Model Line: Gen 3 Precision Metal Grip Modules - P365 X-Macro Series
- MPN/SKU Code: SBGM05-G3-OD (Sharps Bros P365 X-Macro Gen 3 OD Green SKU)
- UPC Code Profile: 850057873740
- Firearm Chassis Fitment: Sig Sauer® P365 / P365XL / P365 X-Macro Fire Control Units (FCU)
- Slide Length Compatibility: Fits P365 X-Macro (3.1" Comp / 3.7" Slide) & P365XL Slides Flush
- Magazine Capability: Accepts Standard Sig Sauer 17-Round P365 X-Macro Magazines
- Accessory Rail Standard: Integrated MIL-STD-1913 Picatinny Bottom Rail
- Structural Material Base: Precision CNC-Machined High-Strength 7075-T6 Billet Aluminum
- Exterior Finish Dressing: Durable Olive Drab (OD) Green Anodized Protective Coating
- Grip Panel Color / Style: Ergonomic Textured Black Composite Side Panel Inserts Installed
- Full Kit Component Checklist: 1x Sharps Bros. Gen 3 Metal Grip Module, Pre-Installed Mag Release
- Packaging Format Class: Factory Original Sealed Sharps Bros. Branded Storage Box
- Product Type Category: Handgun Components / Custom Metal Grip Modules & Frames
- Net Component Mass: ~4.80 Ounces (~136.0 Grams Aluminum Module Mass)
- Global Quality Certifications: Formulated to Rigid US Custom Performance & Tactical Metrics
- Warranty Tracking Protection: Fully Backed by Sharps Bros. Factory Lifetime Limited Warranty
