*CONTACT US FOR A SPECIAL COUPON CODE*
Sharps Bros. Gen 3 Precision Metal Grip Module w/ Manual Safety Cut - Fits Sig Sauer P365X / P365XL Fire Control Units (FCU), CNC Machined 7075-T6 Billet Aluminum, Integrated 1913 Picatinny Rail, Undercut Trigger Guard & Flared Magwell, Anodized Bronze Finish w/ Black Grips - SBGM02-G3-BRZ / 850057873863
Product Description
Upgrading a manual-safety-equipped Sig Sauer® P365X or P365XL pistol for concealed carry, tactical applications, or competitive shooting demands a grip module engineered with higher structural rigidity than factory polymer frames. Standard polymer modules flex under rapid slide cycling, adding unwanted muzzle rise and limiting accessory rail torque on your bench. The **Sharps Bros.® Gen 3 Metal Grip Module with Manual Safety Cut for Sig P365X/XL (SBGM02-G3-BRZ / 850057873863)** solves these frame flex and safety clearance limitations, replacing factory polymer with a precision-machined **7075-T6 billet aluminum chassis** finished in a rich anodized bronze coating with black grip panel inserts.
Proudly designed, CNC-milled, and hard-coat anodized in the United States by Sharps Bros., the Gen 3 module takes P365 customization to an elite level. Carved from high-strength aircraft-grade **7075-T6 aluminum**, it features precision-milled relief notches for **manual safety FCUs**, an aggressive undercut trigger guard for a higher grip axis, a subtly flared magwell for smooth reloads, and an integrated **1913 Picatinny accessory rail** that replaces proprietary Sig rail geometry. Outfitted with ergonomic black side grip panels that offer tactile traction without snagging clothing during concealed carry draws, this drop-in aluminum module completely elevates your P365 Fire Control Unit (FCU) straight from your armorer bench.
Engineered to house factory Sig Sauer P365 manual safety Fire Control Units and accept 12-round, 15-round, and 17-round P365 magazines, this factory-calibrated metal grip module guarantees custom ergonomics and rock-solid rigidity directly from your workspace bench.
*Armorer Bench Notes & Real-World Manual Safety FCU Staging Guidance: The Sharps Bros. SBGM02-G3-BRZ module arrives workspace ready, containing the bronze anodized aluminum grip chassis, pre-installed black grip panels, and magazine release assembly. SIG SAUER P365 MANUAL SAFETY FCU COMPATIBILITY MATRIX: This module is engineered natively with precision factory relief cuts for **Sig Sauer P365 Fire Control Units (FCUs) equipped with a manual safety**. *Slide & Magazine Length Checklist:* Flush-fits with **P365X / P365XL (3.7" slides)** and **P365 X-Macro slides** (dust cover extends flush to XL slide length). Accepts standard **12-round, 15-round, and 17-round P365 magazines** (10-round flush P365 mags are too short unless equipped with XL floorplate extensions). Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host P365 pistol is completely clear of live ammunition, the magazine is removed, and the chamber is checked safe and empty. 2. Lock the slide back, rotate the takedown lever downward, and remove the slide assembly from the factory frame. 3. Push out the rear receiver retention pin on your factory module and lift the manual safety P365 FCU upward and forward out of the polymer seat. 4. Insert the FCU toe first into the Sharps Bros. aluminum module housing, guiding the ambidextrous safety levers through the side safety cut notches on your bench. 5. Press down until fully seated and reinsert the rear retention pin. 6. Install your slide assembly onto the metal frame rails, test manual safety lever engagement and disconnector reset, insert a clear magazine, and perform a complete function check before rolling downrange.*
Key Features
- Factory Precision Manual Safety Cutouts: Features factory-milled clearance slots specifically for Sig Sauer P365 Fire Control Units outfitted with ambidextrous manual safety levers.
- Precision CNC-Machined 7075-T6 Aluminum: Carved from solid billet 7075-T6 aircraft aluminum to eliminate frame flex and provide enhanced rigidity for faster target recovery.
- Integrated Standard 1913 Picatinny Rail: Replaces proprietary Sig rail cuts with a true MIL-STD-1913 Picatinny rail section to mount standard weapon lights (e.g., Streamlight TLR-7 Sub 1913 / SureFire X300).
- Enhanced Undercut & Extended Beavertail: Deeply undercut trigger guard and contoured rear beaver tail allow a higher, more aggressive hand grip to mitigate muzzle rise.
- Subtly Flared Magazine Well: Integrated bottom magwell flair guides 12-round, 15-round, and 17-round P365 magazines smoothly into the grip channel during high-stress reload strings.
- Anodized Bronze Finish w/ Black Grip Panels: Striking anodized bronze finish paired with textured black side panel inserts that provide firm traction without irritating skin during concealed carry.
Product Specifications
- Brand: Sharps Bros.® (Glenrock, WY / Made in the USA)
- Model Line: Gen 3 Precision Metal Grip Modules - P365X/XL Manual Safety Series
- MPN/SKU Code: SBGM02-G3-BRZ (Sharps Bros P365X/XL Manual Safety Bronze SKU)
- UPC Code Profile: 850057873863
- Firearm Chassis Fitment: Sig Sauer® P365 / P365X / P365XL Fire Control Units w/ Manual Safety
- Slide Length Compatibility: Fits P365X / P365XL (3.7" Slide) & P365 X-Macro Slides Flush
- Magazine Capability: Accepts Standard Sig Sauer 12-Round, 15-Round & 17-Round P365 Magazines
- Accessory Rail Standard: Integrated MIL-STD-1913 Picatinny Bottom Rail
- Structural Material Base: Precision CNC-Machined High-Strength 7075-T6 Billet Aluminum
- Exterior Finish Dressing: Durable Anodized Bronze Finish with Matte Corrosion Protection
- Grip Panel Color / Style: Ergonomic Textured Black Composite Side Panel Inserts Installed
- Full Kit Component Checklist: 1x Sharps Bros. Gen 3 Metal Grip Module, Pre-Installed Mag Release
- Packaging Format Class: Factory Original Sealed Sharps Bros. Branded Storage Box
- Product Type Category: Handgun Components / Custom Metal Grip Modules & Frames
- Net Component Mass: ~4.60 Ounces (~130.4 Grams Aluminum Module Mass)
- Global Quality Certifications: Formulated to Rigid US Custom Performance & Tactical Metrics
- Warranty Tracking Protection: Fully Backed by Sharps Bros. Factory Lifetime Limited Warranty
