*CONTACT US FOR A SPECIAL COUPON CODE!*
Sharps Bros® Billet Aluminum Gen 3 Grip Module – SIG Sauer® P365 Manual Safety Models – Black Anodized with Bronze Aluminum Panels – SBGM15-G3-BRZ
The Sharps Bros® Gen 3 Billet Aluminum Grip Module for the SIG Sauer® P365 with Manual Safety (SBGM15-G3-BRZ) represents a revolutionary, high-efficiency mechanical upgrade engineered to overhaul weapon frame rigidity, balance, and ergonomic control. While standard factory polymer grip modules maximize production cost-efficiency and offer lightweight carry parameters, they inherently introduce minor frame flex during intensive rapid-fire strings and lack the structural mass required to aggressively absorb snappy micro-compact recoil. The Sharps Bros Gen 3 platform completely shifts the paradigm. This premium, American-machined tactical upgrade (850057873801) features a precision-machined relief slot tailored specifically for manual safety configurations and replaces polymer furniture with an ultra-premium metal chassis, providing an exceptional primary asset for defensive operators, everyday carry purists, and professionals looking to extract full-sized mechanical authority from their micro-pistol host.
The structural foundation of this micro-chassis is meticulously CNC-machined from a monolithic block of 7075-T6 aerospace-grade aluminum. Renowned for its superior tensile strength and fatigue life over standard 6061 alloys, this billet aluminum architecture completely eliminates frame torque, ensuring the P365’s internal Fire Control Unit (FCU) tracks with absolute parallel consistency. The defining technical edge of the Gen 3 layout is its **redesigned, heat-treated 4140 steel lug insert system combined with integrated ambidextrous thumb ledges (gas pedals)** on both sides of the frame. This patented feature delivers a natural, high-leverage thumb indexing point for either hand, anchoring your support-hand thumb to drive the muzzle back down into target alignment strings instantly. The metal surface is sealed in a rugged, non-reflective Mil-Spec Hardcoat Anodized Black finish for maximum resistance to holster wear, sweat, and impact scuffs.
The true functional highlight of this Generation 3 configuration lies in its custom-tailored ergonomics, dual-tone aesthetic, and interchangeable panel dynamics. Shifting away from basic molded textures, Sharps Bros expands the frame's width from a slim 1.10 inches up to a more robust, hand-filling **1.30 inches**, offering far more surface area for modern recoil control without compromising deep concealment dynamics. This striking model creates an eye-catching visual accent by pairing the black chassis with premium **Bronze Anodized Aluminum side panels featuring aggressive diamond-grid checkering**. Outfitted with an enhanced trigger guard undercut, subtle finger grooves, a subtly flared magazine well to guide 10-round flush magazines smoothly, and a standard MIL-STD-1913 Picatinny accessory rail to open up generic weapon light options, this 3.40-ounce engineering masterpiece delivers total operational command.
Includes: (1) Sharps Bros P365 Gen 3 Billet Aluminum Grip Module (Mil-Spec Black Anodized / Precision Factory Manual Safety Cut), (2) Premium Bronze Anodized Aluminum Diamond-Grid Grip Side Panels with Hex Hardware, Integrated Heat-Treated 4140 Steel Recoil Lug, and Branded Retail Box Packaging.
*Drop-In Installation & Holster Fitment Note: Upgrading your SIG P365 is a simple drop-in process that does not require permanent modification. Ensure your firearm is completely unloaded, remove the slide assembly, and extract the factory takedown pin to lift your manual safety Fire Control Unit (FCU) upward out of the polymer shell. Drop the safety-equipped FCU directly into the pre-cut Sharps Bros frame, re-insert your take-down pin, and re-install your magazine catch assembly (mag release hardware not included). Note: Due to the integrated, recoil-taming thumb ledges, standard Kydex holsters will require minor heat-gun reforming for a clean fit, or you can purchase a dedicated Sharps-compatible custom rig.
Key Features
- Precision Manual Safety Profile: Explicitly machined with a factory-spec relief channel to seamlessly clear and accommodate SIG Sauer manual safety levers.
- Premium Billet 7075-T6 Aluminum: Monolithic aerospace metal construction eliminates micro-frame flex, dramatically improving shot-to-shot tracking consistency and structural longevity.
- Integrated Ambidextrous Thumb Ledges: Patented dual-sided thumb rests act as functional gas pedals, giving the operator maximum leverage to tame snappy micro-compact 9mm muzzle flip.
- Custom Bronze Anodized Aluminum Panels: High-density contrast bronze aluminum side panels offer aggressive diamond-grid texturing that anchors perfectly in wet or dry palms.
- Upgraded 4140 Steel Lug Insert: Heavy-duty heat-treated alloy steel recoil block ensures long-term operational durability under relentless slide cycling lines.
- True MIL-STD-1913 Picatinny Rail: Replaces proprietary SIG rails with a standard universal rail system to facilitate immediate mounting of premium weapon lights and lasers.
Product Specifications
- Brand: Sharps Bros® (Eugene, OR)
- Product Line: Gen 3 High-Performance Handgun Grip Module Matrix
- Model Name: Sharps Bros P365 Gen 3 Manual Safety Grip Module - Black/Bronze
- SKU / MPN: SBGM15-G3-BRZ (Alternative Part Identifiers: SBGM15G3BRZ / SHPS-SBGM15-G3-BRZ)
- Firearm Platform Compatibility: SIG Sauer® P365 (Standard Slide Profiles; Fits P365, P365X, and P365XL Slides)
- Firearm Internal Compatibility: Accommodates Factory Manual Safety P365 Fire Control Units (FCU)
- Magazine Fitment Class: Standard 10-Round Flush Magazines (Accepts Extended Mags with Sleeves/Extensions)
- Grip Module Size Class: Micro-Compact Standard Frame Size
- Chassis Core Material: Aircraft-Grade 7075-T6 Billet Aluminum
- Chassis Surface Finish: Mil-Spec Type III Matte Black Anodizing
- Grip Panel Material Class: Precision-Machined Contrasting Bronze Anodized Aluminum Scales
- Grip Recoil Lug Core: Heat-Treated 4140 Grade Alloy Steel
- Accessory Interface: Integrated MIL-STD-1913 Picatinny Underside Dust Cover Rail
- Product Net Assembly Weight: ~3.40 oz (96.4 g) - Recoil-Damping Mass
- Total Boxed Shipping Weight: ~0.75 lbs (Including Padded Guard Box Packaging)
- UPC Barcode: 850057873801
