Strike Industries Multidirectional Picatinny Rail Cover - Cable Management Slots (CMS), PolyFlex High-Friction Matrix, Clear Smoke Finish, 6-Pack - AR-CMS-MP / 793811765403
Product Description
Upgrading a modern tactical weapon system, night-recon platform, or multi-role carbine forearm requires smart cable management mapping. Stray loose switch wires from weapon lights or laser modules snag easily on branches, thick gear webbing, and vehicle doors, while standard snap-on covers add unnecessary bulk or melt during high-volume strings on your bench. The **Strike Industries® Multidirectional Picatinny Rail Cover with Cable Management (AR-CMS-MP / 793811765403)** completely flatlines these routing vulnerabilities, packing a low-profile **patented PolyFlex structural cable locking matrix** into a sleek, streamlined profile.
Proudly designed and engineered to high-friction performance standards by Strike Industries, these multi-axis protectors are molded from an advanced, heat-resistant **PolyFlex chemical polymer** treated with a distinctive semi-translucent clear smoke finish. Rather than simply hiding wires, the underside features built-in channels that allow armorers to route accessory wires **parallel, perpendicular, or in U-turns** inside the cross-slots of standard 1913 Picatinny rails. This innovative approach keeps external pressure switches clean and tightly secured without messy zip-ties or tape. By acting as a heat shield, protecting rail corners from impact, and providing a specialized, non-slip texture, this turn-key accessory upgrades your handguard layout straight from your workbench.
Engineered to clip securely onto any standard mil-spec 1913 Picatinny rail section, these low-profile modular covers protect your hand position and equipment directly from your workspace bench.
*Armorer Bench Notes & Real-World Wire Routing Guidance: The Strike Industries AR-CMS-MP multi-pack utility package arrives workspace ready, containing 6x individual multi-directional PolyFlex rail cover blocks secured on a factory inventory backer card. PROPRIETARY 1913 PICATINNY HOUSING INTERFACE MATRIX: Every single module is engineered natively, strictly, and precisely to snap onto **standard mil-spec 1913 Picatinny rail sections**. *Modular Footprint Clearance Checklist:* Each individual clip occupies exactly **one single Picatinny rail slot segment**, giving you the flexibility to space them out or stack them continuously to create clean routing paths on your bench. Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host rifle platform is completely clear of live ammunition, the magazine is separated, and the chamber area is empty and safe. 2. Mount your primary tape switch and laser/light modules to the handguard, allowing the lead wire harness to lay loose along the rail. 3. Map out your wire tracking paths, choosing whether to route the cable straight through, angle it 90 degrees across a cross-slot, or form a U-turn loop to store excess wire length. 4. Tuck the wire cleanly inside the lower retaining hooks of the PolyFlex block before pushing the cover onto the rail section. 5. Press down firmly on both outer edges until the retention jaws expand and snap securely over the Picatinny rail corners. 6. Pull gently on the wire to verify it is trapped snug without being pinched sharply or kinked before configuring accessories downrange.*
Key Features
- Patented Cable Management Slots (CMS): Features built-in micro-routing channels on the underside, letting you run wires straight through, turn corners, or store excess cable length under the cover.
- Advanced PolyFlex Material: Molded from a specialized, high-durability polymer alloy that flexes easily for installation but remains rigid enough to block handguard heat.
- Semi-Translucent Clear Smoke: Finished in a unique clear smoke tint, allowing armorers to visually inspect routed wires underneath without unclipping the covers from the rail.
- Multi-Directional Placement: Each modular cap fits symmetrically over a single slot, letting you mix, match, or flip them to accommodate any left, right, or top wire configuration.
- Low-Profile High-Friction Texture: Designed with a subtle, non-slip micro-texture surface that enhances your hand placement grip while preventing the gear snags common with bulky covers.
- Protective Rail Armor Shielding: Guards sharp metal Picatinny rail edges from field dings and abrasive contact, protecting both your hands and nylon sling gear straps.
Product Specifications
- Brand: Strike Industries® (Las Vegas, Nevada / Sourced Components)
- Model Line: Advanced Ergonomic Handguard Upgrades & Cable Management Essentials
- MPN/SKU Code: AR-CMS-MP (Picatinny Cable Management PolyFlex Specification Base SKU)
- UPC Code Profile: 793811765403
- Handguard System Compatibility: Standardized Mil-Spec 1913 Picatinny Rail Decks Natively
- Cable Routing Trajectory Modes: Parallel (Along Rail Axis), Perpendicular (Crossways Across Slots), U-Turn Loop Paths
- Individual Slot Footprint: Spans Exactly 1x Picatinny Cross-Slot Segment per Module Block
- Total Multi-Pack Item Count: 6x Matching Individual Multidirectional Rail Cover Units per Package Retail
- Structural Material Base: Specialized High-Tensile Heat-Resistant PolyFlex Synthetic Polymer Alloy
- Exterior Finish Dressing: High-Friction Semi-Translucent Clear Smoke Synthetic Color Treatment
- Full Kit Component Checklist: 6x PolyFlex Multi-Directional Cable Management Cover Clips, Header Packaging
- Packaging Format Class: Factory Original Sealed Strike Industries Header Presentation Card Pack
- Product Type Category: Rifle Accessories / Picatinny Rail Covers & Tactile Handguard Furniture
- Individual Unit Width Metric: ~1.18 Inches (~30.0 mm Flawless Side Jaw Wrap Trajectories)
- Individual Unit Length Metric: ~0.81 Inches (~20.5 mm Single Slot Picatinny Space Profile)
- Net Combined Pack Mass: ~0.80 Ounces (~22.6 Grams Ultra-Lightweight Dynamic Frame Weight)
- Global Quality Certifications: Engineered to Official Industrial and Duty Field Protection Specs
- Warranty Tracking Protection: Fully Backed by Strike Industries Limited Factory Product Guarantee
