Strike Industries Mini Hand Stop with Cable Management System Fits 1913 Picatinny Rail Polymer Matte Black SI AR CMS PMHS BK UPC 793811767377
Product Description
The Strike Industries® Picatinny Mini Hand Stop with Cable Management System® (SKU: SI-AR-CMS-PMHS-BK / UPC: 793811767377) delivers elite weapon control, indexing consistency, and integrated wire organization to long guns running standard 1913 Picatinny rail platforms. Designed to eliminate the hazards of snagged, tangled, or melted remote pressure switch cables on modern tactical carbines, this compact polymer hand stop incorporates Strike Industries' patented Cable Management System (CMS). By routing and stowing excess illumination and targeting wires internally, the CMS-PMHS creates an ultra-clean, streamlined forend profile that enhances operational reliability in high-stress dynamic environments.
Precision-molded from custom-blended SI Polymer Extreme composite, this miniature hand stop is engineered to withstand brutal field conditions, high-volume barrel heat, and violent impacts against tactical barricades without cracking or chipping. The exterior is molded in deep, non-reflective matte Black, providing complete resistance to moisture, oils, harsh bore-cleaning solvents, and UV degradation. Tipping the scales at a mere 1.12 ounces, it equips shooters with a rigid structural index point and barricade support without disrupting the front-to-rear balance of the weapon system.
Ergonomics and versatility are engineered into every facet of the unit. The CMS-PMHS features a rearward-angled profile that optimizes pull-style weapon manipulation, allowing shooters to drive the stock firmly into the shoulder pocket for flatter recoil mitigation. Both the front and rear faces are cut with aggressive non-slip texturing to guarantee positive purchase even when operating in inclement weather or with heavy tactical gloves. The internal chassis houses specialized cable channels that support parallel routing, side-to-side crossover passes, and complete 180-degree U-turns to neatly conceal slack from weapon lights and infrared lasers.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Direct clamp interface for standard MIL-STD-1913 Picatinny and STANAG 4694 rails. CRITICAL staging notice: Does NOT mount directly to M-LOK or KeyMod slots without an intermediate 1913 Picatinny adapter section. Rail torque mandate: Do NOT exceed 20 to 25 in-lbs (2.26 to 2.82 Nm) when torquing the steel M4 cross-bolts into the lock bar; over-torquing may stress the polymer clamp plate. Ensure electronic cables are seated flush within the internal CMS pass-through channels before drawing the lock bar tight against the rail to avoid wire pinching or sheath severing. Apply the included Loctite® 243® to all fastener threads.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty. Lock the bolt rearward before commencing forend maintenance.
- Select your mounting location on the lower 6 o'clock Picatinny rail (or side rail for thumb-break staging) and determine desired rake angle (rearward rake for pull control, forward rake for barricade bracing).
- Disassemble the polymer side lock bar and route your weapon light or laser remote switch wiring through the internal CMS channels, dressing excess slack into the center cavity.
- Seat the main hand stop body onto the Picatinny rail with the recoil lugs engaged in the rail slots; position the lock bar over the opposite side and insert the two M4x29mm cross-bolts through the assembly.
- Thread the M4 nuts onto the cross-bolt ends, apply a drop of the included Loctite® Blue 243®, and torque both fasteners evenly using the provided T20 Torx key to 20–25 in-lbs; conduct a visual wiring inspection and dry-fire weapon manipulation check prior to live-fire operations.
Key Features
- Patented Cable Management System® (CMS): Dedicated wire routing channels and internal storage cavities organize, conceal, and protect excess remote switch cords.
- Direct 1913 Picatinny Rail Mount: Secure two-bolt clamp architecture locks firmly across standard Picatinny recoil grooves with zero forward or rearward play.
- High-Strength SI Polymer Extreme: Custom-blended impact-resistant composite withstands severe tactical use, high barrel temperatures, and hard barricade contact.
- Optimized Pull-Style Ergonomics: Rearward canted angle enhances mechanical leverage, allowing shooters to pull the carbine tight for superior recoil tracking.
- Bi-Directional Barricade Support: Square-lug profile acts as an aggressive barricade stop when pushed against doors, window ledges, or field cover.
- Aggressive Tactile Traction: Front and rear face texturing delivers dependable hand indexing and non-slip purchase in wet, muddy, or gloved conditions.
- Complete Turn-Key Hardware Kit: Includes polymer lock bar, two M4x29mm cross-bolts, two M4 nuts, T20 Torx tool, and authentic Loctite® Threadlocker Blue 243®.
Product Specifications
- Brand: Strike Industries®
- Model/Series: Picatinny Mini Hand Stop with Cable Management System® (CMS-PMHS)
- MPN / SKU: SI-AR-CMS-PMHS-BK / SIARCMSPMHSBK
- UPC: 793811767377
- Platform Compatibility: Universal MIL-STD-1913 Picatinny & STANAG 4694 Rails
- Length: 55.1 mm (2.17")
- Width: 33.0 mm (1.30")
- Height: 47.2 mm (1.86")
- Material: Custom Blended SI Polymer Extreme Composite
- Finish / Color: Matte Black
- Mounting Hardware: (2) Carbon Steel M4x29mm Screws & (2) M4 Hex Nuts
- Fastener Drive Interface: T20 Torx (Wrench Included)
- Recommended Torque: 20 to 25 in-lbs (2.26 to 2.82 Nm)
- Package Contents: (1) Mini Hand Stop Body, (1) Lock Bar Clamp, (2) M4 Screws, (2) M4 Nuts, (1) T20 Torx Key, (1) Loctite® Blue 243®
- Country of Origin: Designed in USA / Made to Strike Industries Specifications
