Taran Tactical Innovations Carry Aluminum Mag Well Fits Glock 19 23 Gen 2 3 Flat Black GMW3 AC1900 UPC 810003106063
Product Description
The Taran Tactical Innovations® Carry Aluminum Magwell for GLOCK® 19/23 Gen 2/3 (SKU: GMW3-AC1900 / UPC: 810003106063) is an elite, duty-ready reload enhancement engineered to optimize speed and consistency without adding unnecessary bulk to your concealed carry setup. Designed specifically to resolve the compact grip challenges of the Gen 2 and Gen 3 GLOCK 19 and 23 frames, this streamlined magwell channels incoming magazines directly into the receiver cavity during high-stress emergency reloads, making off-axis fumbles a thing of the past.
Every TTI Carry Magwell is precision CNC-machined in the United States from solid billet aerospace-grade 6061-T6 aluminum, providing unmatched structural rigidity that far exceeds 3D-printed or injection-molded alternatives. The exterior surface is treated with a resilient MIL-A-8625 Type III Class 2 Hardcoat Anodize in matte Flat Black, ensuring maximum resistance against harsh bore solvents, weapon lubricants, corrosive body perspiration, and direct drops on concrete or range gravel. At a featherweight 0.7 ounces, it adds just enough counter-mass to the heel of the grip to stabilize recoil recovery and neutral point-of-aim without printing beneath light clothing.
Engineered with the everyday carrier and competitive practical shooter in mind, the magwell features forward ergonomic relief cuts that allow your firing hand to achieve a high, locked-in master grip with zero finger pinching. The underside perimeter is relieved with precision clearances that maintain flawless compatibility with factory OEM Glock baseplates and all TTI Firepower base pad extensions. Built to satisfy strict match regulations, the overall dimensions fit inside the IDPA CCP (Compact Carry Pistol) measurement box, delivering championship-level speed to your daily defensive pistol.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: OEM Factory GLOCK 19, GLOCK 23, and GLOCK 32 Gen 2 and Gen 3 frames. CRITICAL fitment and staging warnings: Engineered strictly for Gen 2 and Gen 3 factory frames; will NOT fit Gen 4 or Gen 5 pistols. Does NOT fit Polymer80 or aftermarket frames. Incompatible with early Gen 2 frames featuring the half-moon "U" cutout on the front bottom strap. Incompatible with modular backstraps. Will NOT seat flush if the frame is stippled down to the lower edge of the magazine chute (requires smooth polymer surface or hand fitting). INSTALLATION NOTICE: When starting the 10-32 set screw through the lanyard cavity, enter at a slight angle to align with the aluminum internal thread channel; do NOT cross-thread or over-torque past 12 to 15 in-lbs.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty. Lock the slide rearward or field-strip the frame prior to installation.
- Clean and degrease the lower perimeter and internal lanyard channel of the Glock frame grip, ensuring no dirt, plastic burrs, or excess lubricant remain.
- Position the TTI Carry Magwell squarely over the base of the frame, hooking the front lip over the front strap, and press firmly upward and rearward until the unit seats fully flush against the frame shoulders.
- Insert the provided 10-32 x 3/8" alloy steel set screw into the bottom frame cavity at a slight upward angle using the included 3/32" hex key, engage the threads carefully by hand, and tighten smoothly until firm retention is achieved (recommended 12 to 15 in-lbs maximum; do not over-torque).
- Insert both an empty OEM factory magazine and an extended base pad magazine to confirm positive, uninhibited latching on the magazine catch; perform drop-free release tests and dry-fire slide manipulation checks prior to live-fire range staging.
Key Features
- Precision Flared Carry Funnel: Expands the magazine entry chute to guide reloads smoothly into the frame under severe dynamic and low-light conditions.
- CNC Billet 6061-T6 Aluminum: Machined in the USA from solid aerospace billet for maximum strength, surviving direct drops and barricade impacts without flex.
- IDPA CCP Division Legal: Compact, low-profile exterior geometry fits inside the IDPA Compact Carry Pistol box while eliminating printing during concealed carry.
- Balanced 0.7-Ounce Mass: Adds functional weight to the lower grip heel to offset front-heavy muzzle flip and promote rapid sight-picture return.
- Forward Relief Cuts: Ergonomic finger bevels prevent support-hand crowding and ensure comfortable, pinch-free master grip positioning.
- Full Base Pad Compatibility: Underside relief channels guarantee seamless locking and drop-free ejection with standard OEM plates and all TTI Firepower extensions.
- Rugged Unitized Mounting: One-piece construction installs securely with a single 10-32 extended point alloy steel set screw and included 3/32" hex wrench.
Product Specifications
- Brand: Taran Tactical Innovations®
- Model/Series: Carry Aluminum Magwell for GLOCK® Gen 2/3
- MPN / SKU: GMW3-AC1900 / GMW3AC1900 / TTIGMW3-AC1900
- UPC: 810003106063
- Platform Compatibility: GLOCK® 19, GLOCK® 23, GLOCK® 32 (OEM Factory Frames)
- Generational Fitment: Generation 2 & Generation 3 Only
- Division Legality: IDPA CCP (Compact Carry Pistol) Approved
- Material: CNC-Machined Billet 6061-T6 Aerospace Aluminum
- Finish: MIL-A-8625 Type III Class 2 Hardcoat Anodized (Flat Black)
- Mounting Hardware: 10-32 x 3/8" Alloy Steel Extended Point Set Screw & 3/32" Hex L-Key
- Magazine Clearance: Factory OEM Glock Floorplates & TTI Firepower Base Pads
- Country of Origin: Made in USA
