TriggerTech Legacy Special Glock Gen 1-5 Flat Trigger Black - G9B0-SBS-26-LBBF

** PLEASE USE COUPON CODE " TT25 " WITH THIS ITEM! **

TriggerTech Legacy Special ACE Trigger System Flat Straight Lever Fits Glock Gen 1 5 Matte Black G9B0 SBS 26 LBBF UPC 885768004701

Product Description

The TriggerTech® Legacy Special ACE Trigger System (SKU: G9B0-SBS-26-LBBF / UPC: 885768004701) redefines the mechanical baseline of the Glock pistol, transforming the platform's spongy factory pull into the crisp, glass-rod break of a high-end 1911. Engineered by TriggerTech from the ground up, the Advanced Combat Enhancement (ACE) system replaces standard sliding-friction trigger bars and connectors with a patented rolling sear interface that completely eliminates parasitic trigger creep, gritty pre-travel, and erratic reset points.

At the mechanical core of the Legacy Special are hardened 440C stainless steel rolling components that eliminate surface wear, lubrication reliance, and carbon drag. The system is split into three discrete modular assemblies: a precision-machined 7075-T6 aluminum Flat Straight Lever Module, an internal Sear Module governed by CLKR Technology™, and a dedicated Disconnect Module integrated into a replacement slide backplate. Using the external CLKR detent adjustment screw, shooters can precisely dial trigger break weight between 2.5 lbs and 6.0 lbs, tailoring the shoe for light match-grade competition or firmer defensive staging.

Engineered with an OEM-style bladed safety lever, the Legacy Special preserves intuitive finger placement and familiar handling characteristics while introducing frame-decoupled safety geometry that remains unaffected by receiver tolerance stacking. The trigger system has been extensively tested to pass rigorous SAAMI drop test standards, featuring an engineered striker relief pocket in the backplate to prevent inertial discharges under extreme shock. Fully approved for USPSA and IPSC competitive divisions, this trigger brings true benchrest precision to combat sidearms.

*Armorer Bench Notes & Real-World Staging Guidance:*

Fitment Matrix: Fits standard-frame Glock Gen 1 through Gen 5 pistols chambered in 9mm and .40 S&W (G17, G17L, G19, G19X, G22, G23, G24, G26, G27, G34, G35, G45, G47). CRITICAL: NOT compatible with slimline frames (G42, G43, G43X, G48) or large-frame Glocks (10mm/.45 ACP). GEN 5 WARNING: Gen 5 installations mandate the removal of the small plastic guide tab inside the frame trigger cavity (refer to manufacturer technical manual). Trigger pull weights adjusted below 3.5 lbs are intended solely for sanctioned competition/target shooting and are NOT recommended for defensive carry.

1. Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
2. Field strip the pistol, detail strip the slide rear cover plate, and remove the factory trigger bar, connector, and housing assembly from the frame.
3. Install the TriggerTech Sear Module and Lever Module into the lower frame using the provided pin alignment tool, ensuring the trigger housing pin and locking block pins seat fully.
4. Slide the TriggerTech Disconnect Module (backplate) onto the slide assembly, ensuring the striker and extractor depressor assemblies align freely within the backplate relief channel.
5. Reassemble the slide onto the frame, select your desired pull weight using the 5/64" Allen key into the CLKR screw (clockwise to increase weight, counter-clockwise to decrease), and execute a 5-point armorer safety and drop-safety function test prior to live fire.

Key Features

• Patented Zero Creep Technology™: Proprietary free-floating roller design completely eliminates sliding friction, delivering an authentic 1911-style crisp glass break.
• CLKR Technology™ Pull Adjustability: Externally accessible micro-detent screw allows tactile, precise pull-weight adjustments ranging from 2.5 lbs to 6.0 lbs.
• Modular 3-Piece ACE Architecture: Decouples the sear and connector into independent Lever, Sear, and Backplate modules for unmatched mechanical consistency.
• Hardened 440C Stainless Steel Internals: Self-cleaning, corrosion-proof rolling internal surfaces maintain precise factory tolerances over tens of thousands of rounds.
• USPSA & IPSC Approved: Fully sanctioned for competitive practical shooting divisions while delivering duty-rated drop safety at 3.5+ lb configurations.
• Integrated Blade Safety Lever: Preserves traditional Glock trigger safety mechanics while isolating the drop-safety ledge from inconsistent frame tolerances.

Product Specifications

• Brand: TriggerTech®
• Model/Series: Legacy Special ACE Trigger System for Glock
• MPN / SKU: G9B0-SBS-26-LBBF / G9B0SBS26LBBF
• UPC: 885768004701
• Trigger Profile: Flat / Straight Lever
• Trigger Action: True Two-Stage
• Pull Weight Range: 2.5 lbs – 6.0 lbs (Fully Adjustable)
• Internal Metallurgy: 440C Stainless Steel Core Components
• Lever Material: 7075-T6 Aircraft Aluminum
• Safety Mechanism: Integrated Center Blade Safety (SAAMI Drop-Safe)
• Finish / Color: Matte Tactical Black
• Platform Compatibility: Glock Gen 1–5 Standard Frames (9mm & .40 S&W)
• Country of Origin: Canada