*CONTACT US FOR A SPECIAL COUPON CODE!*
TriggerTech® Legacy Special ACE Trigger System for Glock® – Two-Stage Straight/Flat Lever – Adjustable 2.5–6.0 lbs – Fits Standard Frames Gen 1-5 9mm/.40 S&W – Matte Black – G9B0-SBS-26-LBRF
Product Description
The TriggerTech® Legacy Special ACE Trigger System for Glock® (G9B0-SBS-26-LBRF) represents an elite mechanical milestone in handgun action engineering, defensive firearms optimization, and modular component logistics, proudly designed and manufactured by TriggerTech. Purpose-built to completely rewrite the baseline trigger dynamics of the world's most ubiquitous polymer pistol platform, the Legacy Special infuses standard Glock frameworks with a highly refined, crisp, 1911-inspired break. While traditional aftermarket Glock triggers rely on a simple modified one-piece connector bent by hand—retaining mushy take-up, noticeable sponge creep, and overtravel flex that can pull a shooter off-target during fast sequences—TriggerTech completely eliminates parasitic movement through an independent 3-module system. This premium component array (885768004497) grants competitive marksmen and tactical end-users total authority over their shooting mechanics.
The core mechanical triumph of this advanced system centers on its **patented Zero Creep Technology™ and customizable CLKR Technology™ tuning module**. Unlike standard triggers that require stacking sear friction to break, TriggerTech's low-friction rolling sear design breaks cleanly with zero physical creep, shifting your weapon platform into an incredibly predictable, repeatable tracking cycle. The integrated click-adjustable CLKR screw enables operators to dynamically tune total pull weight from a razor-sharp 2.5-pound competition break up to a deliberate 6.0-pound duty threshold without altering hammer strike force or primer ignition velocity. This flat, two-stage system features a straight-face lever that shortens vertical reach while encouraging uniform finger placement, maximizing leverage during high-tempo strings and double-tap reset drills.
The structural safety and competition utility of the Legacy Special are secured by its **frame-decoupled safety mechanics and an up-armored shock-absorbent backplate**. Recognizing that Glock frames suffer from minor variations in internal polymer specifications, TriggerTech decoupled the bladed safety and transfer bar geometry from the frame itself, ensuring a uniform trigger break across Generations 1 through 5. The bundled Disconnect Module features a redesigned slide backplate with a milled relief pocket that prevents internal striker contact during violent dropped shock loads, easily passing rigorous SAAMI drop tests with a large margin of safety when configured at 3.5 pounds or higher. Fully USPSA and IPSC division approved, this matte black modular upgrade provides unparalleled structural and operational uniformity across your entire training environment.
Includes: (1) Authentic TriggerTech Legacy Special Flat Lever Module with Integrated Bladed Safety, (1) TriggerTech Sear Module with CLKR Pull-Weight Adjuster, (1) TriggerTech Disconnect Module (Custom Relief-Pocket Backplate), (1) Light Lever Take-Up Spring, (1) Heavy Lever Take-Up Spring (Pre-Installed), (1) Light Safety Plunger Spring, (1) Professional Pin Tool, and (1) 5/64" Allen Calibration Wrench, Packed inside Original Branded Factory Sealed Retail Packaging.
*Administrative Armorer Staging, Pull-Weight Settings & Frame Compatibility Guidance: The TriggerTech G9B0-SBS-26-LBRF is a multi-module drop-in action group. **CRUCIAL PLATFORM FITMENT NOTE:** This system is engineered exclusively to fit standard-frame Glock pistols chambered in 9mm Luger and .40 S&W (including models 17, 17L, 19, 19X, 22, 23, 24, 26, 27, 34, 35, 45, and 47); it is completely incompatible with slimline models (G43/43X/48) or large-frame configurations (10mm/.45 ACP). **GEN 5 INSTALLATION REQUIREMENT:** When installing this modular sear block inside a Generation 5 frame, operators must manually clip or remove a small plastic alignment tab on the internal frame wall per the official TriggerTech guide instructions to ensure correct seating layout. **DUTY / CARRY SAFETY MEMO:** Pull weight configurations set below 3.5 pounds are intended strictly for controlled competition, range training, and match environments; **TriggerTech explicitly recommends setting the CLKR dial to 3.5 pounds or higher for any defensive carry or active duty operations**. Ensure your host pistol is verified fully unloaded, the magazine is removed, and the chamber is completely empty before attempting bench work layout updates.
Key Features
- Patented Zero Creep Technology: Employs a unique rolling-sear release matrix to deliver a truly zero-creep break, mimicking a high-end match 1911 trigger.
- Tunable CLKR Weight Adjustment: Allows operators to quickly click-tune pull resistance between 2.5 and 6.0 pounds without affecting the fire control strike energy.
- Straight Flat-Face Profile: Straight trigger lever geometry optimizes natural finger placement and leverage to keep target tracking flat during intensive rapid fire.
- Shock-Resistant Disconnect Backplate: Custom backplate design houses a mechanical striker relief corridor to maximize rough-handling drop protection.
- Frame-Decoupled Bladed Safety: Reimagines the traditional Glock safety blade on a decoupled geometry to preserve reliable safety block clearance across real-world frame variations.
- USPSA & IPSC Competition Approved: Authorized for production and carry optics categories, offering a significant advantage over stock components in tournament matches.
Product Specifications
- Brand: TriggerTech® (Precision engineered, CNC-machined, and live-fire endurance vetted natively to elite standards)
- Product Line: ACE Trigger System Premium Pistol Action Upgrades
- Model Series Designation: Legacy Special Two-Stage Flat Glock Trigger Assembly
- SKU / MPN: G9B0-SBS-26-LBRF (Alternative System Identifiers: TTTG9B0-SBS-26-LBRF / G9B0SBS26LBRF)
- UPC Barcode Number: 885768004497
- Firearm Platform Mechanical Fitment: Glock® Standard Double-Stack Frame Handguns (Generations 1, 2, 3, 4, and 5)
- Caliber Chambering Compatibility: 9x19mm Parabellum & .40 S&W Standard Sub-Chassis Modules
- Model Compatibility Grid: Glock 17, 17L, 19, 19X, 22, 23, 24, 26, 27, 34, 35, 45, 47 (Excludes Single-Stack and Large-Frame Lines)
- Trigger Shoe/Bow Geometry: Monolithic Straight Flat-Face Profile Lever
- Action Operation Class: Short Two-Stage Action (Designed for tactile 1911 trigger feel matching)
- Trigger Pull Weight Variable: Adjustable Range from 2.5 lbs up to 6.0 lbs (Using Dial CLKR Tech)
- Safety Control Interface: Classic Bladed Safety Insert (Redesigned Symmetrical Blade Lever)
- Internal Mechanical Technologies: Zero Creep Technology™, TKR Technology, CLKR Technology™
- Trigger Chassis Finishing Profile: Hardened Component Sub-Assemblies with Corrosion-Resistant Matte Black Finishes
- Modular Component Breakdown: 3-Piece Pack Architecture (Lever Module, Sear Module, Disconnect Module backplate)
- Product Net Component Weight: ~2.00 oz (~56.7 g) Ultra-Low Mass Internal Upgrades
- Total Packaging Shipping Mass: ~0.50 lbs (Enclosed Inside Secure Protective Presentation Hanger Box)
