HUXWRX Safety Co HUB QD Adapter 2 0 1 375x24 TPI Suppressor Mount 3486 UPC 810176430064
Product Description
The HUXWRX Safety Co.® HUB QD Adapter 2.0 (SKU: 3486 / UPC: 810176430064) integrates the industry-standard 1.375x24 HUB suppressor mount pattern with the combat-proven HUXWRX Torque Lock™ quick-detach ecosystem. Engineered for operators and tactical marksmen seeking rapid can interchangeability across rifles equipped with HUXWRX flash hiders and muzzle brakes, this adapter brings universal modularity to your dedicated hard-use rifle silencers.
Precision CNC-turned from high-tensile 17-4 PH heat-treated stainless steel, the HUB QD Adapter 2.0 withstands extreme pressure spikes, continuous high-temp firing schedules, and unburnt powder erosion. The entire component is treated with a uniform salt-bath QPQ black Nitride finish, creating a case-hardened, non-reflective surface barrier that resists carbon adhesion, chemical bore cleaners, and corrosive environmental exposure.
The streamlined Version 2.0 design completely eliminates the protruding blast cage found on original Gen 1 models, significantly reducing overall mount length, trimming dead weight, and expanding the effective volume of your silencer's blast chamber for optimal expansion and reduced backpressure. Featuring HUXWRX's left-hand taper interface, the adapter actively tightens against your muzzle device under operational recoil forces, eliminating suppressor walk-off and preserving point-of-impact repeatability.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Universal 1.375x24 TPI HUB/Bravo-pattern centerfire rifle suppressors mounting onto HUXWRX and OSS QD Flash Hiders and Muzzle Brakes (5.56, 6mm, 7.62). CRITICAL: NOT compatible with proprietary thread socket patterns (SilencerCo Charlie, 1.125x28 Alpha, or direct-thread dedicated tubes) or non-HUXWRX QD muzzle devices. ATTENTION: HUXWRX muzzle devices utilize LEFT-HAND threads. To attach the suppressor, rotate COUNTER-CLOCKWISE; to remove, rotate CLOCKWISE. When seating the adapter into your HUB suppressor body, clean all threads thoroughly, apply 2–3 drops of Rocksett or Loctite 272, and torque to 25–35 ft-lbs.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Thoroughly clean and degrease the internal 1.375x24 HUB threads of your suppressor and the male threads of the HUB QD Adapter 2.0 using acetone or residue-free solvent.
- Apply 2 to 3 drops of high-temperature threadlocker (Rocksett recommended) to the male adapter threads and hand-thread the adapter into the rear of the suppressor body.
- Secure the suppressor in a padded vise block and torque the adapter using the integrated wrench flats to 25–35 ft-lbs to ensure a permanent, non-backing joint.
- Install the assembled suppressor onto your HUXWRX QD muzzle device using reverse left-hand rotation until fully seated against the alignment taper, and verify bore concentricity with a caliber-specific alignment rod before live firing.
Key Features
- Universal 1.375x24 HUB Threading: Converts any industry-standard HUB silencer to interface directly with HUXWRX QD muzzle hardware.
- Torque Lock™ Left-Hand Taper System: Counter-clockwise locking taper actively tightens under sustained recoil impulses, preventing can backing and POI shift.
- Version 2.0 Streamlined Geometry: Eliminates legacy blast cage extensions to reduce weight, save length, and maximize blast chamber volume.
- 17-4 PH Stainless Steel Construction: Heat-treated alloy architecture delivers extreme structural rigidity and thermal resistance under rapid strings of fire.
- Melonite QPQ Nitride Coating: Case-hardened surface treatment prevents carbon galling and resists corrosive gas impingement.
- Precision Wrench Flats: Engineered with dedicated tool engagement surfaces for proper armorer torquing and secure bench assembly.
Product Specifications
- Brand: HUXWRX Safety Co.®
- Model/Series: HUB QD Adapter 2.0
- MPN / SKU: 3486 / HUX3486
- UPC: 810176430064
- Suppressor Thread Pattern: 1.375x24 TPI (Industry Standard HUB / Bravo / Omega)
- Muzzle Device Interface: HUXWRX QD Left-Hand Reverse Thread Taper
- Compatible Muzzle Devices: HUXWRX & OSS QD Flash Hiders and Muzzle Brakes (5.56, 6mm, 7.62)
- Platform Compatibility: Universal 1.375x24 HUB-Pattern Suppressors
- Metallurgy: Heat-Treated 17-4 PH Stainless Steel
- Finish: QPQ Salt-Bath Black Nitride
- Added System Length: Approximately 0.85 Inches
- Wrench Interface: Precision Tool Flats / Spanner Compatible
- Country of Origin: United States (Millcreek, Utah)
