Strike Industries Grip Plug Tool for GLOCK Gen 3 and Gen 4 5 SI G GPT SIGGPT UPC 708747548174 793811763362
Product Description
The Strike Industries® Grip Plug Tool for GLOCK™ (SKU: SI-G-GPT / UPC: 708747548174) transforms the hollow rear cavity of your pistol's grip frame into an indispensable on-board armorer station and high-speed reload funnel. Purpose-built for combat handguns, duty weapons, and competition rigs, this multi-functional upgrade seals the open void behind the magazine well against fouling while providing operators with immediate access to essential field-strip tools and emergency lubrication when running missions away from the armorer bench.
The exterior chassis is injection-molded from Strike Industries' impact-modified, high-tensile polymer, engineered to withstand aggressive weapon presentations, concrete drops, and direct contact with harsh synthetic gun bore cleaners, carbon solvents, and lubricants. Stowed securely inside the core cavity is a precision-ground, hardened carbon steel multi-tool bit featuring a standard 3/32" Glock-spec takedown pin punch on one end and a utility flathead screwdriver on the other. A dedicated internal fluid reservoir sealed with a high-durometer nitrile O-ring keeps several drops of high-viscosity CLP or synthetic oil fully protected against moisture and evaporation.
Beyond onboard tool storage, the exterior geometry of the grip plug serves as an ergonomic magazine ramp. By closing the factory frame gap that frequently snags magazine baseplates during dynamic speed reloads, the angled contour acts as a minimalist funnel that guides fresh magazines smoothly into the chamber track. With tool-less installation and instant tactile extraction, the Grip Plug Tool provides practical insurance against field stoppages without altering the handgun's holstered carry profile.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Gen 3 variant (SI-G-GPT) fits Glock Gen 3 full-size and compact models (17, 19, 22, 23, 31, 32, 34, 35) and P80 PF940C. Gen 4&5 variant (SI-G-GPT-G4&5) fits Glock Gen 4 and 5 models (17, 19, 22, 23, 31, 32, 34, 35, 37, 45). CRITICAL: Not compatible with GLOCK Gen 4/5 modular backstraps; must be run on bare frames. The punch tool will NOT fit inside compact Gen 4/5 grips (plug installs without tool). Incompatible with subcompact models (G26, G27, G30) and Slimline frames (G42, G43, G43X, G48). Incompatible with Strike EMP magazine extensions. On certain Gen 3 compact frames, minor hand-sanding of the forward ramp tongue may be required to achieve 100% drop-free magazine clearance.
- Ensure the host Glock is completely cleared, magazine removed, slide locked open, and the chamber visually and physically verified empty.
- Assemble the internal toolkit: fill the reservoir capsule with 3 to 5 drops of quality CLP/oil, secure the threaded O-ring cap, and slide the hardened steel punch/flathead bit into its dedicated storage slot.
- Insert the multi-tool sub-assembly into the body of the Strike polymer grip plug until seated flush within the retaining tabs.
- Align the assembled Grip Plug Tool with the rear cavity of the Glock receiver grip frame, orienting the angled magazine ramp surface toward the magazine well opening.
- Press firmly upward until the retention detent locks securely into the lanyard hole recess; insert and drop an empty factory magazine to confirm smooth entry and drop-free clearance prior to live-fire staging.
Key Features
- Integrated Magazine Funnel Ramp: Smooths out magazine insertions by eliminating the open frame ledge that catches feed lips during rapid combat reloads.
- Hardened Steel Armorer Punch: Built-in 3/32" pin punch fits standard Glock trigger, locking block, and housing pins for complete field stripping.
- Flathead Utility Screwdriver: Reversible tool tip enables quick elevation/windage adjustments on weapon lights, lasers, and iron sights.
- Sealed Emergency Oil Reservoir: O-ring sealed fluid capsule holds emergency lubricant reserves to rescue dry or carbon-fouled actions in the field.
- Debris Cavity Shield: Encloses the rear trigger housing void to prevent dirt, mud, sand, and lint from contaminating internal fire-control components.
- Tool-Less Installation & Removal: Snaps securely into the factory grip lanyard pocket with no modifications or set screws required.
Product Specifications
- Brand: Strike Industries®
- Model/Series: Grip Plug Tool For GLOCK™
- MPN / SKU: SI-G-GPT (Gen 3) / SI-G-GPT-G4&5 (Gen 4&5)
- UPC: 708747548174 (Gen 3) / 793811763362 (Gen 4&5)
- Chassis Material: Impact-Modified Glass-Reinforced Polymer
- Tool Bit Metallurgy: Hardened Carbon Steel
- Internal Tooling: 3/32" Pin Punch, Flathead Driver, Sealed O-Ring Oil Reservoir
- Finish: Matte Black
- Installation Interface: Friction-Fit Factory Frame Lanyard Cavity
- Platform Compatibility: GLOCK™ Gen 3, Gen 4, and Gen 5 Full-Size and Compact Frames (Excludes Subcompacts, Slimlines, and Backstrap Configurations)
- Country of Origin: Taiwan
