*CONTACT US FOR A SPECIAL COUPON CODE*
Radian Weapons Anchor Magwell Glock 17 34 45 47 Gen 5 Grey R0952 UPC 810098421614
Product Description
The Radian Weapons® Anchor™ + Magwell for Glock® (SKU: R0952 / UPC: 810098421614) sets a new industry standard for full-size Gen 5 Glock handguns, engineering lightning-fast combat reloads into an ultra-sleek, duty-ready profile. Tailored specifically for OEM Gen 5 Glock 17, 34, 45, and 47 frames, this low-profile funnel dramatically expands the magazine opening to funnel fresh magazines smoothly into the chamber chute during high-stress reloads. By funneling off-axis magazine insertions without snagging, the Anchor + Magwell provides competition-level reload speeds and enhanced grip leverage without adding unwanted bulk to your concealed carry or duty footprint.
Precision CNC-machined from high-strength 6061-T6 billet aluminum, the DA116 counterpart for pistols is built to endure punishing secondary weapons impacts, gravel, and heavy drops. The exterior is finished in Radian's signature hardcoat anodized Radian Grey, delivering an ultra-resilient surface layer that resists holster wear, surface gouging, sweat, and caustic cleaning solvents. Unlike legacy aftermarket magwells that rely on single cross-pins or friction screws that flex the polymer frame, the Radian system utilizes an internal billet anchor block that locks solidly inside the grip cavity, preserving factory frame integrity while eliminating the inward wall bulge that causes magazine binding.
At the mechanical core of the system is Radian's patented three-way lockup assembly. The tapered internal PLANAR-LOK™ screw forces the barbed expansion teeth outward into the interior frame ribs for uncompromising longitudinal retention. Simultaneously, the magwell dovetails into the rear of the anchor, indexes its integral tooth over the front lip of the frame, and snaps into place via the spring-assisted ANGLE-LOK® detent. The result is a rock-solid, rattle-free installation that locks the firing hand securely into the master grip while maintaining flawless compatibility with standard capacity factory magazines and extended aftermarket basepads.
*Armorer Bench Notes & Real-World Staging Guidance:*
Fitment Matrix: Engineered exclusively for factory OEM Glock® Gen 5 full-size 9mm frames: G17 Gen 5, G34 Gen 5, G45, and G47. CRITICAL: NOT compatible with Gen 1, 2, 3, or 4 Glock frames. NOT compatible with compact Gen 5 frames (G19/G23/G44/G49), Slimline models (G43/G43X/G48), or large-frame Glocks (10mm/.45 ACP). NOT compatible with aftermarket frames (such as Polymer80, Lone Wolf Freedom Wolf, Nomad Defense, or Shadow Systems). Factory modular backstraps cannot be used without permanent armorer modification. CAUTION: During Step 3, do NOT overtighten the PLANAR-LOK screw; turning more than 1.5 to 2 turns past initial taper contact will over-stress and potentially fracture the internal polymer ribs of your serialized frame.
- Ensure the host firearm is completely clear, magazine removed, and chamber visually and physically verified empty.
- Slide the anchor screw through the tapered top opening of the ANCHOR, thread it in until the taper just contacts the opening, then back the screw out one half-turn counterclockwise to ensure free clearance.
- Fully seat the ANCHOR assembly into the grip cavity of the upside-down frame, insert the provided 3/32-inch hex key, rotate the screw counterclockwise until light taper contact is felt, and torque counterclockwise exactly 1-1/2 to 2 turns maximum.
- Insert the detent spring followed by the plunger (tapered end up) into the lower hole of the ANCHOR, align the magwell's rear female dovetail with the ANCHOR, and depress the plunger with the provided ANGLE-LOK tool while sliding the magwell rearward until the detent snaps locked.
- Place the front lip of the magwell against a protected flat surface (such as cardboard on an armorer bench), press firmly downward on the frame to seat the front tooth completely, insert an empty factory magazine to verify drop-free operation, and conduct complete dry-fire function checks.
Key Features
- Patented Three-Way Mechanical Lockup: Merges PLANAR-LOK™ frame anchoring, a front lip index tooth, and ANGLE-LOK® spring detents for zero wobble.
- Eliminates Magazine Chute Binding: Anchors internally against lateral cavity walls to completely prevent inward frame wall deflection and sticky reloads.
- CNC Billet 6061-T6 Aluminum Construction: Milled from aerospace billet aluminum to deliver severe duty impact durability at a negligible weight penalty.
- MIL-A-8625 Hardcoat Anodized Grey: Ultra-tough Radian Grey anodize provides exceptional resistance to abrasions, holster rub, and chemical cleaners.
- Flared Funnel with Forward Cutout: Accelerates reload indexing under stress while providing clearance for positive emergency magazine stripping.
- Enhanced Grip Control: Features an ergonomic front ledge that secures the shooter's pinky finger into the master grip for superior recoil mitigation.
Product Specifications
- Brand: Radian Weapons®
- Model/Series: Anchor™ + Magwell (Full-Size Gen 5)
- MPN / SKU: R0952 / R0952
- UPC: 810098421614
- Platform Compatibility: OEM Glock® 17, 34, 45, 47 (Gen 5 Only)
- Frame Size: Full-Size 9x19mm Receiver
- Material: 6061-T6 Billet Aluminum
- Finish: Type III Hardcoat Anodized (Radian Grey)
- Locking Mechanism: PLANAR-LOK™ Internal Anchor & ANGLE-LOK® Detent Plunger
- Included Hardware: Anchor Block, Magwell, Screw, 3/32" Hex Key, Spring, Detent, Installation Tool
- Country of Origin: United States (USA)
